pressured solar water heater collector
1.ce,ccc,iso9001 certificate
2.offer OEM service
3.warranty:15 years
pressured solar water heater collector
feature:
1.light-weight,easy installation and short delivery time
2.attractive design,standard frame suitable for pitched roof or flat roof
3.can be connected with the existing heating device
4.there is no water directly flowing inside tubes, so the system will still work in case of occasional tube breakage.
advantage of split solar water heater system:
separated systems prevent freezing by containing no water in the tubes. The system uses an efficient copper heat pipe technology to transfer heat from the tubes to the fluid source. A glycol mixture can be used to allow use through all seasons without freezing problems.
since the system is automated,there is no need to worry about whether your water will be hot. the solar heater will heat your hot water supply and if there is not enough sun for a few days or you take away too many hot showers,your normal backup heating can keep your water hot for you.
stagnation temperature is about 200c. this is the absolute maximum temperature you can expect the solar heater to reach in case of pump failure and the system stops working. reaching this temperature will not damage the system.
description:
high pressure solar collector module
model | diameter of vacuum tube | length of vacuum | Qty of vacuum tube | effective heating area | ||
MXE-SC58-1.8-10 | 58mm | 1800mm | 10 | 1.38m² | ||
MXE-SC58-1.8-12 | 58mm | 1800mm | 12 | 1.65m² | ||
MXE-SC58-1.8-15 | 58mm | 1800mm | 15 | 2.06m² | ||
MXE-SC58-1.8-18 | 58mm | 1800mm | 18 | 2.48m² | ||
MXE-SC58-1.8-20 | 58mm | 1800mm | 20 | 2.75m² | ||
MXE-SC58-1.8-24 | 58mm | 1800mm | 24 | 3.30m² | ||
MXE-SC58-1.8-30 | 58mm | 1800mm | 30 | 4.13m² |