Welcome to B2BAGE
split solar heater system
split solar heater system

Minimum Order: 0
Quality/Safety Certification: 0.00


split solar heater system
1.Good quality,High thermal efficiency,
2.Stable performance and easy to operate.

split solar heater system

 

The characteristic
1.The upright tank can make the water temperature to different level. It can hot the top water instantly. The special structure can reduce the cold and hot water to mix together.
2.The tank inside the building, the connection pipe between the tank and water tap is very short, so that hot water can be used instantly and seldom cold water flows out.
3.The tank inside the building, the hot water loses less energy than the normal one.
4.The heater collector and the water tank is separated, that makes the system combine with the building perfectly, which will reduce the sightseeing for the building and environment around.
5.Back up with electric heater so that in the day without sunshine hot water can also be used.

6.Can be combined with gas or electric heater trough the copper coil.
7. Max. Pressure: 12bar Operating Pressure: 6 bar

Specification
1.Inner tank: SUS304 2B food grade stainless steel
2.Outer tank: white color steel or Stainless steel
3.Insulation: Polyurethane 45mm, 50mm
4.Copper coil:15m each, diameter 12mm,thickness 1mm.
5.: Ati-freeze:-35C
6.Capacity:100L,150L,200L,250L,300L,400L,500L

Model

Tank
Capacity

Heat pipe or U Pipe Collector

Work Station

Qty (20"/40" FCL)

58X1800

No.

ITM-150

150L

58X1800

15
(1 collector of 15 tubes)

A circulating
unit system
combined by
controller
and
pump station

45/96

ITM-200

200L

58X1800

20
(1 collector of 20 tubes)

32/68

ITM-250

250L

58X1800

25
(1 collector of 25tubes)

27/56

ITM-300

300L

58X1800

30
(1 collector of 30 tubes)

24/50

ITM-400

400L

58X1800

20X2
(2 collector of 20 tubes)

19/40

ITM-500

500L

58X1800

30x1+20X1
(1 collector of 30 tubes
and 1 collector for 20 tubes)

16/36


Working principle:

 

The collector absorbs solar energy and transmits it to the water tank through circulation.When the temperature of the collector reaches the set value, the controller starts the circulation pump automatically.The circulation pump makes heat-conducting liquid circulate automatically.
Then the heat-conducting liquid transfers heat to water by heat exchanger in the tank to heat the water

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.