The advanced wind/solar hybrid controller is specially designed for high-end small-scale wind/solar hybrid system and especially
Features:
1. Ultra-low loss, conversion efficiency is as high as 97%.
2.The built-in MTTP (Maximum Power Point Tracking chip,), make solar panels power output always at its best
3. Current against-irrigation protection, prevent the equipment from damage
4.Automatic battery temperature sensing compensation, extend the battery life
5.According to the battery types,choose different charging mode.
6.It can connect DC load directly.
7.Charging design in three states(constant flow, constant pressure and floating charge)
8.LCD shows charging status instantly.
9.The PWM technology optimize various performance of battery.
Technical Parameter:
Model | OYD-S 40/60-12 | OYD-S 40/60-24 | |||
Voltage serial number | 12VDC | 24VDC | |||
Controller input | input voltage range | 15-30VDC | 30-55VDC | ||
Max charge current | 40A/60A | ||||
Largest open voltage of solar panel | 55VDC | ||||
Max output current(DC load) | 15A | ||||
Self-consumption of Controller | Less than 10mA | ||||
Overload protection of controller | It can insist 5 seconds when the maximum output current is in 2 times , more than 20 seconds when it is in 1.5 times | ||||
Battery charging control | Fast charging voltage (controller) | 14.6V(Default value) | 29.2V(Default value) | ||
Float charging voltage setting (controller) | 13.4V(Default value) | 26.8V(Default value) | |||
Equalized charging voltage setting(controller) | 14.0V(Default value) | 28.0V(Default value) | |||
Overcharge disconnect battery voltage | 14.8V | 29.6V | |||
Overcharge restore battery voltage | 13.6V | 27.2V | |||
Temperature compensation rate | -13.2mV/°C | -26.4mV/°C | |||
Battery Settings | (lead-acid, nickel cadmium battery) all can set by yourself | ||||
Battery discharge control | Over-discharge disconnect voltage | 10.8V(Default value) | 21.6V(Default value) | ||
Over-discharge restore voltage | 12.3V | 24.6V | |||
Voltage value | 14.4V | 28.8V | |||
Low cut-off voltage | 10.5-12.5VDC | 21.0-25.0VDC | |||
Low voltage to connect | 12.0-14.0VDC | 24.0-28.0VDC | |||
Operate environment | Environment temperature | 0-40°C(work fully) | 40-60°C(drop work) | ||
operate elevation | It can be used below 5000m, stored below 16000m | ||||
Machine oover protection | grade | IP21 | |||
Accessory | Battery temperature sensor | BTS, remote monitoring control (optional) |