solar heater
1)EXW,FOB
2to Denmar,Romania etc.
3)customer from more than 13countries
4)near Lecong ,Guangzhou
Non-pressurized Solar water heater
How non-pressurized solar water heater works
1. Non-pressurized solar water heater of all glass evacuated tube collector integrated with storage tank, are ideal for use in houses and other applications where cheap, reliable hot water supply is required. They are simple, economic and practical.
2. As the specific gravities of hot water and cold water are different, cold water goes downward and hot water goes upward.
3. When cold water in evacuated tubes is heated, it becaomes lighter and goes to the water tank, while cold water in the tank goes down to the evacuated tubes
4. Through this circulation, the cold water in the water tank will be gradually heated.
Non-pressure solar water heater features
1. Cheap and reliable solution, Simple structure, Easy installation
2. High efficiency
3. Withstands water pressure no more than 0.4MPa
4. Operated without any power supplying
5. Electric heater can be used as back up in rainy and cloundy days
6. Hot water can be used directly, or can be used as a pre-heated
Solar hot water heating system optional accessories
1. Assistant tank: 3/5/8/10/12L
2. Intelligent Controller
3. Electrical heater: 1.5/2.5kw
Solar hot water heating system specification
Descripition | Non-pressure solar water heater |
Material of outer tank | 0.31-0.4mm thickness color steel/ fluorine carbon steel |
Material of inner tank | Food grade 1-0.5mm thickness SUS304 stainless steel |
Tank insulating layer | 55mm 45kg/m³ high-density polyurethane foamed |
Inlet and outlet hole | Male G 1/2, 3/4 |
Max pressure | 0.5 Mpa |
Solar collector tube | 3.3 Borosilicate glass with N/Al coating |
Thickness of glass tube | 2mm |
Vacuum tube tightness | P≤0.01 Pa |
Absorption | as=0.93-0.96(AM1.5) |
Emission ratio | εh=0.04-0.06(80C±5C) |
Idle sunning property parameters | Y=220~260m2.C/KW |
Average heat loss coefficient | ULT=0.6~0.7W/(m2.C) |
Bracket: | 1.5mm thickness galvanized steel |
Structure of tank: | 4 holes for air vent,overflow,water inlet and outlet,electric heater |
Welding: | Argon arc welding |
Fastening pieces: | Made of stainless steel screw |
Absorber area | more than 10m² |
Tube quantity | 200tube 58x1,800mm |
Tank capacity | 1000L |
