1.Intelligent solar controller
2.Control speed of the circulation pump
3.Operating time counter of the solar pump
4 CE
Function:
Our 8011 series is an intelligent controller with the typical set-up for a collector-storage. The circulation pump must operate only when the collector can supply a useful gain of energy to the storage tank. This controller is complete and the parameter programming can be done by the installer directly following faithfully the indications.
Main functions:
1. SYSTEM (ONE SYSTEM)
2. DT O & DT F Temperature difference controlling the solar circuit pump
3. THET Timing heating
4. EM Emergency collector temperature (emergency switch-off temperature of collector)
5. CMX Maximum limited collector temperature (collector cooling function)
6. CMN Low temperature protection of collector
7. CFR Frost protection of collector
8. SMX Maximum temperature of tank
9. REC Tank re-cooling function
10. C-F Celsius and Fahrenheit temperature transferring
11. DVWG Anti-legionella function
12. CIRC Temperature controlled hot water circulation pump
13. nMIN Solar circulation pump speed adjusting (RPM speed controlling)
14. OHQM Thermal energy measuring
15. INTV Pump interval function
16. BYPR High temperature by-pass function (Tank temperature automatically adjusting)
17. Holiday function
18. HND Manual mode
19. PASS Password setting
20. LOAD Recovery to factory setting
21. Manual Heating
22. Temperature query function
23. Memory Protection
24. Anti-dry heating protection
25. Screen protection
26. Trouble protection