MPPT PV charge Controller/MPT-8130/CE
Microprocessor controls PWM with MPPT tracker

This MPPT PV Charger controller extracts power from the solar panel at its max. power by varying the operating point of the PV according to the changes of the intensity of the sunlight to increase the net charging power to the battery and at the same time using the 5 stage charging alogrithms to avoid over or under charging. An advanced IC with special firm ware and software developed for tracking sunlight intensity and varying the the operating point of PV are used in this charge controller . This MPPT PV Charge Controller has extensive electronic protections , 10 selective timer programs for lighting . Selection for Wet and Sealed battery type. Automatic low voltage cut off of the output load terminal to prevent battery from over discharge . There are 3 LED clearly indicating the battery condition , the charging stage , and fault . The wire connections terminals for the solar panels , load and battery are concealed and protected behind a flip cover on the front panel of the controller . It is an easy to install and use solar charge controller with only two selections to make .

 

Features

Microprocessor controls PWM with MPPT tracker 5 stage charging : Soft-Bulk, Bulk, Absorption, Float, Equalization or Boost. Automatic load disconnection / reconnection. 3 LED indicator for Battery conditions, Charging states and Fault. Selection of Sealed and Wet Type battery. Dusk to Dawn automatic ON-OFF with 10 selectable on-off programs. Optional Remote Temperature Sensor for compensated battery charging. Electronic protections (self-recoverable) for  Over voltage to the battery. Wrong sequence connection to PV Short circuit and over current to the load Input solar panel over current protection Over temperature protection Battery reverse connection. Operating temperature range: -20°C to +60°C CE Approval