Separate pressure solar water heater system 1.solar keymark certificate for collector,2.Tank with CE 3.inner tank with SUS304

Split pressure solar water heater system: 

2)Solar collector have U pipe and Heat pipe model for your optional

3)Tank with CE certificate

4)Pressure tank include P/T valve,Electrical heating element and Magnesium anode

5)Pressure tank with SUS304 or SUS316 inner tank for you optional

6)Tank with three different model,without cooper coil,double coils,single coil

7)Use intelligent controller and Wilo brand Circulate pump

8)System working pressure is 0.6mpa

9)can working under -20C degree cold weather

10)Tank capacity from 100L to 300L

Working principle

a) When the discrepant temperature of the solar collector and water tank reaches or not reaches the set valve, the controller shall start or shut the circulation pump automatically.

b) The circulation pump makes water circulate automatically.

c) In case the temperature of the water tank does not reach Tmax, then start the auxiliary heating device.

---------------------------------------------------------------------------------------------------

Features

1) Collector separates with the storage tank. The tank can be put anywhere of the house.

2) The collector can be put on both flat roof and inclined roof.

3) Module design harmony with the building perfectly.

4) Intelligent control and automatic operation.

5) If the solar water heater uses superconductive pipe, it can still in service even with several tubes breakage.

6) Multifunction: Bathing, washing, domestic heating.