SELF FILLING PUMP

andrea(_at_)suntasksolar.com

NO FILLING PUMP NEEDED

Caution:

1. Do not connect the flexible pipe and liquid container contrarily after the slar station installing on the system.

2. Please turn the circulation pump on the MAX power during the liquiid feeding.

3. Ensure all the air in the pipline should be exhausted.

4. Keep the appropriate pressure in hte pipline.If no pressure,please check the pipeline carefully to ensure no any leaking on the pipeline, then re-feeding liquid.

5. It is forbidden to open any valve during the working state,to avoid the liquid leaking.

Technical parameter

Application range:Combined self-fill circulatin unit for solar thermal applications.

Body Dimensions(H*W*D):476x285x158mm

Max pressure: 10Bar

Max working temperatrure: 110C

Max surrounding temperater: 45C

Connection size: G3/4'' female

Safety Device

Safety valve: 6Bar

Air stop device: G1/4''

Thermometer/presuure gauge:0~10Bar/0~120C

Circulation pump

Mode: WILO RS-15/6     RS-25/6

Maximal folw rate: 2.5T/h

Max lift : 6m

Max working pressure : 10Bar

Working temperater: -25C+110C

Power supply: 220V/60HZ or 110V/50Hz

Balance valve

Flow rate control range: 4 to 16L/ min

applicability : flow meter is control the flow rate from the rang 4-16L/ min, the flow meter can display eactly flow rate. Anti-blast glass and brass cover Vertical installation is obligatory.

Cover

Outer EPP black ppe