Split Pressurized collector
1.project use
2.OEM
3.SRCC,KEYMARK CCC CE ISO

 Split Pressurized collector

 Description:
Pressurized solar collector, could assemble on roof and on flat roof, Harmony with the building perfectly. Heat pipe is a kind of copper pipe with inner anti-freezing inorganic working medium, it works well even at an ambient temperature ≤ (-)45 and it possesses characteristics such as long lifespan ( more than 15 years), anti-insolation (250), anti-freezing (-45 ), low start-up temperature (≤30), and a high thermal transmission coefficient (10000 times comparing with pure copper), it is a real special heat pipe suiting to be used in solar field.

Heat Pipe Solar CollectorTechnical Specification:

Manifold Casing Material: Aluminum
Frame Material: Aluminum

Vacuum tubes :58*1800mm /47*1500mm
Header Pipe Material: Copper
Heat Pipe Material: Copper
Insulation: Rock Wool
Rubber Seals and Rings UV Stabilized High Temperature Silicon Rubber
Test Pressure: 10 bar
Collector Mounting Flat Roof/Inclined Roof
Mounting Angle: 15-50C
Inlet: 3/4''

Heat Pipe Solar CollectorWork Principle:
1) The operation of the solar collector is very simple.
2) Solar absorption: solar radiation is absorbed by the solar tubes and
converted into heat.
3) Solar heat transfer: heat pipes conduct the heat from within the solar tube
up to the header pipe
4) Solar energy storage: water is circulated through the header, via
intermittent pump cycling.Each time the water circulates through the header, the
temperatures is raised by 5-10C. Throughout the day, the water in the tank is
gradually heated

Delivery Terms: