1.Cast iron case worm gear box.
2.Hight quality.
3.Stable transmission with low noise.
4.reliable.

Worm gear reducer characteristic and the application

1. The main characteristic is the worm and worm gear tooth surface between conjugate tooth close movement, is sliding and rolling combination, its characteristic with stable and small vibration, low noise, small impact.

2 big transmission ratio due to small diameter, worm and worm large diameter gear, single stage worm transmission has larger ratio, general and commonly used for the transmission range 1500r/min in 5-80 turn between.

3. Usage worm gear deceleration machine is mainly used in metallurgy, mine, lifting, transportation, chemical, textile, architecture and food etc has drastically reducing speed desired mechanical equipment deceleration transmission, generality extremely extensive.

4. Use maintenance the machine before use heart is required to add 68 # JiXieYou lubricating oil, oil amount shall not be lower than the standard center or worm centerline and oil level above or low are likely to leave in the operation of temperature, first used after 24 hours, they must be finished with diesel oil put clean or kerosene, then add new lubricant after every 800 to 1,000 hours, must restart put out, cleaning and adding new lubricating oil. In high temperature or continuous work, please send rings and gas hole open, in order to heat dissipation

Specifications:

1.widely used intubines,shaft liners and axletrees,goog resistance to wear,with precision in dimensions,low noise,advanced centric running castings.

2.with air vent and high precision.

3.the structure is compact and the weight is large.