spray booth/GL10
Minimum Order: 0
Quality/Safety Certification: 0.00
Sitable for most of bus.
Very good ventination and good quality.
Suitable for different market
| GL10 CONFIGURATION | ||||
| Name | specification | optional | ||
| 1.Body | ||||
| Panel | Sandwhich style,δ=50mm.polystyrene | Rock wool | ||
| Basement | Concrete structure made by customers. 2rows of grids | 3D lift | ||
| Ramp | No | |||
| emergency door | 2 pcs emergency door with pressure lock | |||
| Front door | 4pcs of front door whitout aluminum side cover | |||
| 2. Air system | two sets,specification of each set as below: | |||
| frame | steel,powder coated | |||
| Intake fan | 11kw | |||
| Exhaust fan | 11kw | |||
| Intake duct | 5m straight exhaust ducts,one 90°bend,and 60°bend | |||
| Exhaust duct | 5m straight duct,one 90°bend,and one 60°bend | |||
| Exhaust damper | 1 manual VCD adjustable damper | Eletrical VCD | ||
| Intake damper | 1 manual VCD adjustable damper | Eletrical VCD | ||
| Chimney duct | 5m straight chimney and 2 small bends | |||
| Spray/baking Transition damper | automatically air controled | |||
| burner | RIELLO/RG5S | |||
| heat exchanger | stainless steel,circular heating,chimney at front | |||
| 3.Filtration system | ||||
| Roof filter | 16 pcs of filter,mounted above support frame,which is made of steel and powder coated | |||
| Floor filter | 2 pcs | |||
| Air mouth filter | 2 sets,2 pcs.M style before intake and exhaust fan | |||
| 4.Light system | ||||
| Upper light | 20 set. 4*40w per set | |||
| Side light | 16 sets.4*40 per set | 32 sets,4*40 per set | ||
| 5.Electric sysytem | ||||
| Control panel | imported components ,overload,over heat,phase-lacking,protection,motor Y/start | |||
| Automatical stop | Automatical stop when preset time is up | |||
| Pressure meter | 1 piece | |||
| Constant temprature apraying | Yes | |||
| Power | 50kw | |||
| 6.Environmental system | ||||
| Environmental filter | No | M style activated carbon or drawer style activated carbon | ||
