Welcome to B2BAGE
High quality and low cost of pallet flow racking system
High quality and low cost of pallet flow racking system

Minimum Order: 0
Quality/Safety Certification: 0.00


FIFO is appropriate for goods with requirements on time of placement.This racking is made by Q235 of Steel.It has high quality.

Pallet flow racking also known as gravity rackings. It belongs to the pallet rack storage rackings.

Racking works:

Gravity racking derivatives one of the beams, rackings similar to the structure of beams, but the placement of the beam on the drum track, the track was 1.5-3 ° tilt. Forklift moving pallets of goods to the shelves with stock port, the use of self-respect, imported automatically from the slide pallet to the other side of the pickup port. Is the FIFO is stored. Racking depth and layers may need. Gravity rackings for less variety of the same goods in large quantities of storage, maximum space utilization.

Racking Features:

1, High-end goods from the deposit, slipped to the low-end, from the low-end out. Cargo slide during a slide damper on the set, the control of goods kept in a safe taxi speed range. Slide one end of the set have separator shipping, handling machinery can be successfully retrieved the goods first board position.

2, The goods follow the FIFO order. Rackings with a storage density, high security and are flexible with the function. Edit this paragraph applies, the time difference is mainly used for high demand of goods (such as to ensure uninterrupted supply of material production) and other occasions.

The structure of the gravity racking: gravity racking evolved from the pallet using the roller wheel track or the end of the pallet.

Gravity Racking features:

Track was a certain gradient (1.5-3 ° or so), the use of cargo weight, the FIFO in goods, while into the other side out, for large quantities of similar goods FIFO memory operations, high utilization of space, especially for certain warranty, not a long backlog of goods.

 

Gravity racking Note:

The total depth of the shelf (ie rail length) should not be too large, it is best controlled at 25 meters, can not use the up and down "dead" will be greater use of space, and the ramp is too long, controllability of decline will be less, the larger the momentum down, easy to cause decline in poor, standing in the way, tipping the tray of goods. In order to smooth down, such as the ramp is longer, to be located in the middle of the damping device, in order to fall to the bottom of the pallet when the goods will not impact too large for tipping should be located in the lowest ramp buffer device and take cargo divider, so the design, manufacture, installation difficult, so I can send engineers to install. Such rackings should not be too high, usually less than 10 meters, single-prop cargo weight is generally less than 1000KG-2500KG, otherwise the reliability and operability will be reduced.

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.