Heavy duty steel racking work on a first-in,first-out basis,provides extremely high levels of storage density in a given area.

The Load Table:

Heavy duty steel plate rackings, and known as beam racking, or racking of position type, belonging to pallet racking category, a variety of storage rackings system in the domestic, the most common form of a racking. Frame(Upright) + beam to form of fully assembled structure, the structure simple and effective. Container storage unit according to the characteristics of installed equipment such as: every file, steel plates (with wooden shelves), metal mesh deck, storage cage rail, frame drums and other functional accessories. Unit load devices to meet the different forms of cargo storage. Heavy duty racking is the most common form of rackings, each bearing more than 500Kg, called the heavy-duty racking. They have a good efficiency, heavy items can be stored.

The main features of heavy-duty racking:

1. Usually the goods through pallet, storage cage, and other unit load devices shelf packaged into custody after. 2000kg per unit load is generally less than two units on each floor are usually placed.

2. Is the most common and widely used one racking, suitable for most goods in the warehouse or products.

3. With 100% arbitrarily selected characteristics of the goods. Handling machinery such as forklifts and other cargo can reach any place to store operations, store operations easy and fast!

4. By mechanical handling equipment for storage operations.

5. Rack unit span is generally less than 4m, depth 1.5m or less, low, high storage racking height is generally less than 12m, ultra-high-bit storage shelf height is generally less than 30m (basically all of these storage warehouse, the total high rack by the several segments within the column constitutes 12m).

6. Be able to freely adjust the multiple of 75mm on each storey.

 Layer 1 ton to 5 ton truck design, the surface electrostatic spray, rust and corrosion water more capable, high safety factor, plug-in combination, do not need screws and welding, assembly is very easy to make full use of space area, providing storage capacity.

Heavy Duty Racking Structure:

heavy duty steel plate racking by the columns, beams, cross bracing, diagonal bracing, and self-locking bolt assembled, can effectively prevent the bolts loose shelves after the trigger instability; beam using a special cold P-type closed beam; The structure is simple and reliable, light weight, high capacity and low cost characteristics; column card column connection with the special design with the safety pin, you can ensure that the beams would not fall off the external impact; laminates made by the international strip laminates, with load strong, resistant to wear and tear, the replacement of simple, low-cost maintenance features.

Installation: First, the horizontal pull (cross brace), stayed (braces) with the screws installed in the columns. The assembled the two frames (one frame= two column + horizontal pull + a few beams) pieces erected on the ground from the column was adjusted to the length of the beam after the beam can be installed. Installed when the Vice-frame column piece is installed first, and then packed column piece on the side away from the main frame of film from the column was adjusted to the length of the beam after the beam can be installed.

Product quality and after-sales service:

product quality and technology to the national or industry standards, and through the ISO9001 quality certification, acceptance criteria for quality and technology by country or industry standards for acceptance. Since one year from the date of shipment, product quality problems caused by not properly used, can be replaced free of charge, except human factors.