Products

Stainless Steel Shot

Stainless Steel Cut Wire Shot

Shape

Conditioned

Cylindrical

Sizes specifications

In accordance with SAEJ441, AMS 2431 standards

Chemical composition

304 Austenite Type(C) <0.25%,(Cr)=16~18%,(Ni)=6~

 10%,(Si)<1%,(Mn)<2%

430 Ferrite Typecarbon (C)<0.25%, chromium (Cr)=16~18%,

    silicon (Si)<1% and manganese (Mn)<1%

410 Marten site Typecarbon (C)<0.25%, chromium (Cr)=11~13%,

  silicon (Si) <1% and manganese (Mn) <1%

Required products with other chemical components by clients can also be provided

Microhardness

308~509 HV  Vickers

32~50 HV  Rockwell

Tensile intension

490~1520 Mpa

Durability

6500 Times

(1.0mm, VDFI8001)

7000 Times

(1.0mm, VDFI8001)

Microstructure

304Type: Deformed Austenite

430Type: Deformed Ferrite

410Type: Deformed Martensite

Density

7.8 g/cm3

Bulk density

4.7 g/cm3

Note: Part of the 304 Austenite stainless steel shot will convert into Marten site type, getting magnetic through a process of drawing, cutting and rounding.

2.5mm

2.0mm

1.5mm

Use for surface cleaning, sand-removing, descaling, deburring and shot peening of large stainless steel and high-alloy steel precision casgings, stainless steel forgings and stampings, stainless steel plates, stainless steel pipes and stones etc.

1.0mm

0.8mm

0.6mm

Used for surface cleaning, sand-removing, descaling, deburring and shot peening of small and medium-sized pieces of stainless steel precision castings, copper and zinc alloys, aluminum and magnesium alloy die castings, steel forgings and stampings, stainless steel plates, stainless steel pipes, molds, glassware and stones etc

0.5mm

0.4mm

0.3mm

0.2mm

Used for surface cleaning, sand-removing, descaling, deburring and shot peening of small pieces of stainless precision castings, chrysochalk alloy precision castings, aluminum and magnesium alloy die castings, stainless steel forgings ,stainless steel plates, stainless steel pipes, molds and glassware etc.