China No.1 quality & lowest price AOD finery smelting stainless steel round,angle,flat,square,hexagonal,channel bars,ss wires
Stainless Steel Round Bar
Surface settlement: hot-rolled, pickled, cold-draw, straightening, polishing, peeling, grinding or customized.
The Tolerance of Dia.&shape for hot-rolled SS round bar
Stainless Steel Angle Bar
Length range: normal is 4m, 5m, 6m, the tolenrace ≤+40
Right angle allowable Variation: 90°C±°C
Surface settlement:hot-rolled, pickled solution heat treatment for austenitic SS, annealled state for ferrite SS
Mechanical propertise of Angle bar
Heat treatment | Grade | Tensile test | Hardness test | ||||
σ 0.2 MPa | σ b MPa | δ 5% | HB | HRB | HV | ||
≥ | ≤ | ||||||
Solution | AISI304 | 205 | 205 | 40 | 187 | 90 | 200 |
AISI304L | 205 | 520 | 40 | 187 | 90 | 200 | |
SUS304 | 175 | 480 | 40 | 187 | 90 | 200 | |
AISI316 | 205 | 520 | 40 | 187 | 90 | 200 | |
AISI316L | 175 | 480 | 40 | 187 | 90 | 200 | |
AISI321 | 205 | 520 | 40 | 187 | 90 | 200 | |
AISI310 | 205 | 520 | 40 | 187 | 90 | 200 | |
Anneal | AISI410 | 205 | 450 | 40 | 183 | 88 | 200 |
Stainless Steel Flat Bar
Standard: ASTM A484, A246, A582, GB704,GB5215
Specification: For hot-rolled flat bar,the thickness range is 3~25mm;the width
range is 20~320mm. For hot-forged flat bar,the thickness range is
20~60mm;the width range is 20-350mm. For cold-drawn flat bar, the
thickness range is 3~25mm;the width range is 19~180mm.The cold
drawn flat bar tolerance is H10 or customized.
Stainless Steel Square Bar
Standard: ASTM A 276/A 276M, A 484/A 484M, A 564/A 564M, A 582/A 582M
Specification: the A/F range of stainless steel square bar are S10.0- S40.0(hot-rolled,pickled)
S5.0- S60.0(cold-drawn, bright).
Length range: specified length, double length, radom length, the Max must be 1000mm(for single )
Stainless Steel Hexagon Bar
Specification: the A/F range of stainless steel hexagon bar are S6.0~S55.0mm(cold rolled);
S6.0~S55.0mm(cold drawn);
Surface settlement: cold drawn, bright polishing,
Stainless Steel Channel Bar
Length range: normal is 4m, 5m, 6m or customized, the tolenrace ≤+40
Straightness Variation:the curvature≤4mm/m, the Max warp is 0.40% for specified length.
Right angle allowable Variation: 90°C±°C
Stainless Steel Wire
Material: 316, 316L, 321, 310, 308, 304HC, 304M, 304ES, 304, 304L, 301, 301Cu, 200Cu,
201Cu, 201Cu-1 etc.
Application: petroleum, chemical, mechanical and electrical, hardware,construction, boiler fuel gas equipment, food and medical instrument, etc