Wind Tower Steel
1.Thk:1.5-400mm
2.width:864-4020mm
3.material:Q345 C/D/E,Q390,Q420,Q500,S355 JO/J2/J2G3/K2/N, A572 Gr50/70,
wind power pole /wind power steel
three blades
dynamically balanced
lower cyclic loads with simple rigid hub
high quality material
1.Thickness:1.5-400mm
2.width:864-4020mm
3.length:2000-23000mm
4.material:Q345 C/D/E,Q390,Q420,Q500,S355 JO/J2/J2G3/K2/N, A572 Gr50/70,
material | process |
| Q345 steel plate | organize the most experience technical personal to design |
| Q235 steel plate | accroding to your request -the style of the pole tower,the height,the model of the wire,the lighting protection facilities,the horizontal span,field geology,natural conditon,make the final design and prepare to product |
| cross-arm-attachment bolt | with the advanced equipment and the high level workers,get the material from the warehouse |
| flange-attachment bolt | firstly make the majority of the pole, as the dimension requirement ,cut steel plate with lengthways cut machine and numerial control cut machine |
| long bolt spanner | secondly ,fold two steel plates with the advanced large-scale numerial control hydraulic bender ,then correct and weld |
| ladder attachment bolt | thirdly,weld with auomatic submerged-arc welder |
| cross-arm-attachment nut | deal with the surface of the pole |
| flange-attachent nut | the production of the cross-arm,bottom flange,tensile flange |
| ladder attachment nut | with the automatic numerical control cutting machine ,cut the accurate plates ,bottom flange bore drilling machine to drill the holes |
| long bolt | weld all the plates together and weld carefully |
| H08A,H08MnA welding wire | join the pole,flange and cross-arm together |
| HJ431welding flux | hot dip galvanization and installation |
| zinc | whole quality monitor in the process |
1 contact
2 design
3 select material with care
4 cuts the steel products
5 drill hole
6 straighten
7 Galvanization
8 Installation of equipment
9 inspection and adjustment
10 packing
1 contact
2 design
3 select material with care
4 cuts the steel products
5 drill hole
6 straighten
7 Galvanization
8 Installation of equipment
9 inspection and adjustment
10 packing
