1,Diameter:0.20mm-0.80mm;
2,Tensile strength: 2150-2450N/mm2; 2450-2750N/mm2, 2750-3050N/mm2, 3050-3350N/mm2;
The advantages of our products
1, the diameter of steel wire: The diameter tolerance that our company controlled can be ±0.005mm.
2, the tensile strength of steel wire: our company can produce the hose steel wire with tensile strength could be reached 2750Mpa and 3050Mpa. Especially the tolerance of each steel wire by national standard is 300 Mpa, but the strength tolerance of steel wire produced by our company could be controlled within 200 Mpa.
3, the advantage is fixed-length: the fixed-length of all spools of steel wire that our company produced is consistent, this can enable our customers to use each spool entirely , thereby to reduce the cost of our customers products and increase the economic benefit of our customers.
|
NORMAL DIAMETER |
TOLERANCE | TENSILE STRENGTH |
MINIMUM NUMBER OF BREAKING TWISTS |
MINIMUM NUMBER OF BREAKING REVERSE BENDS | MINIMUM NUMBER OF KNOTTING STRENGTH |
0.20 | ±0.010 | 2 150-2 450 | 70 | 125 | 58 |
0.25 | 2 150-2 450 | 70 | 125 | ||
0.30 | 2 150-2 450 | 65 | 105 | ||
0.35 | ±0.015 | 2 150-2 450 | 65 | 60 | |
0.40 | 2 150-2 450 | 65 | 55 | ||
0.42 | 2 150-2 450 | 60 | 50 | ||
0.46 | 2 150-2 450 | 60 | 45 | ||
0.50 | 2 150-2 450 | 60 | 40 | 50 | |
0.56 | 2 150-2 450 | 60 | 35 | ||
0.60 | 2 150-2 450 | 60 | 30 | ||
0.65 | 2 150-2 450 | 55 | 25 | ||
0.70 | 2 150-2 450 | 50 | 20 | ||
0.75 | ±0.020 | 2 150-2 450 | 50 | 20 | |
0.78 | 2 150-2 450 | 40 | 15 | ||
0.80 | 2 150-2 450 | 40 | 15 |
