using easily for every one,hot sell in world
we can produce for your image!
MOQ:200PCS or 50M2
removable,washable

Wall Sticker: Safe and non-toxic

Material: Boeing film

each wall decal include two parts,decal and transfer film!

How to use?

1. White Backing

2. Vinyl Decal

3. Transfer Tape

One step:

Lay your Dezign with a Z adhesive decal on a hard, flat surface and rub firmly over the wall decal with a squeegee (credit card, rubber spatula...etc.). This will strengthen the bond between the vinyl decal and the transfer tape (this way the vinyl decal won't stay on the white backing when you remove it - see following step)

Two step:

Remove the white backing, making sure the vinyl decal sticks properly to the transfer tape.

Three step:

Arrange the vinyl sticker on the desired surface. Press the top edge onto the surface and firmly smooth the tape all the way down, avoiding bubbling and wrinkles.

Four  step:

Finish the application by rubbing over the entire wall decal with the squeegee in order to remove any air bubbles and activate the bond between the vinyl graphic and the surface

Five step:

Remove the transfer tape from one corner & slowly roll it along the surface. If part of the wall decal sticks to the tape, simply roll the tape back, press down firmly & continue peeling.

 Six step:

 Remove any air bubbles by rubbing over the decal with a clean cloth (you can also poke bubbles with a fine needle and then smooth it out). On textured surfaces be sure to rub over the wall decal very firmly! This will ensure a proper bond between the wall decal and the surface, and will prevent it from peeling off over time. This phase is really important to ensure the wall decal will adhere properly to the surface. Bring extra care to this step in any case.

Voila! We hope you will  enjoy for years your new Dezign With a Z vinyl decor!

As the differences in latex,it is recommended that you test the performance before use.If it drops powder quite essily,we dont recommend you using these walls as they will be quite hard to paste on and also wont  last long time.On the other surfaces,like glass,ceramic,plastic,you dont need to worry about this problem.If you want to remove it,you can use a hair dryer to minimize the damage on the original surface.

Each sticer will have 2 pieces:the sticker itself and transferring film

How to select wall sticker?

The first principle is it must fit your home style.If the room is minimalism,that is simply using black white colors,or extremely colorful,should choose abstract art design,like lines.If it is a mod design,should choose realistic patterns.The continental style require neutral and low-key look,then we could choose patterns coming from continental decorative symbols.

Another principle is the position.We dont recommend using the wall sticker to the entire room,which makes the room looking chaotic.You can choose one side as your major target using large size to decorate,which gives people strong visual impact.

Another principle is choosing some specific areas such as bathroom,steps,window corners,doors which brings attractive attention,or using small,simple but personal patterns to show off your taste:like facial expessions,switch stickers.

We wish you can really enjoy our ideas and create your like more colorful and so different!!!