1.CE Approved,100% burn-in test
2.Good quality,shortest lead time,long working life,complete protection
15W single output led switching power supply Competitived price and high reliability 105oC Output capacitor AC input power suitable for the world High efficiency and low operation temperature. Soft-start current can reduce the AC input impact effeciticly With short-circuit and overload protection Compact size, light weight 100% full-load burn-in test Installed with EMI filter, minimum wave
| Model | S-15-5 | S-15-12 | S-15-24 |
| DC output voltage | 5V | 12V | 24V |
| Output voltage range(Note:2) | ±2% | ±1% | ±1% |
| Rated output current | 3A | 1.3A | 0.7A |
| Output current range | 0-3A | 0-1.3A | 0-0.7A |
| Wave and noise(Note:3) | 50mVp-p | 50mVp-p | 100mVp-p |
| Inlet stability(Note:4) | ±0.5% | ±0.5% | ±0.5% |
| Load stability(Note:5) | ±1% | ±0.5% | ±0.5% |
| DC output power | 15W | 15.6W | 16.8W |
| Efficiency | 65% | 68% | 72% |
| Adjustable range for DC voltage | +10,-5% | ±10% | ±10% |
| Input current | 0.5A/115V 0.25A/230V | ||
| AC inrush current | Cold-start current 15A/115V 30A/230V | ||
| Leakage current | <0.5mA/240VAC | ||
| Overload protection | 105%~150% Type: pulsing hiccup shutdown Reset: auto recovery | ||
| Over-voltage protection | 115~135% | ||
| Temperature coefficient | ±0.02%/(0~50) | ||
| Setup, rise , hold up time | 800ms, 50ms, 10ms/115V 300ms, 50ms, 80ms/230VAC | ||
| Vibration | 10~500Hz, 2G 10min,/1cycle, Period for 60min, Each axes | ||
| Withstand voltage | Input and output internal: 1.5KvAC, Input and enclosure:1.5KvAC, Output and enclosure:0.5KvAC | ||
| Working temperature and humidity | -10°c~+60°c(Refer to output derating curve), 20%~90%RH | ||
| Overall dimension | 99×97×35mm | ||
| Weight | 0.37Kgs | ||
| Safety standards | UL 1012 TUV EN6050(IEC, UL 1950) Approved | ||
| EMC standards | CISPR22(EN55022), IEC801-2,3,4,IEC555-2 Verification | ||
Note: 1. The testing condition for the paramenter above is: 230VAC input, rated load, 25°c 70% RH. Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5). 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inler woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%. | |||
