130w Laser Power Supply
1.Start/stop is controlled by TTL
2.Output open circuit protection
3.Max Current:38mA
4.CE
Main features:
1.Good compatibility: It can be applicable to 60W,80W or 100W laser tube manufactured by various factories.
2.Cutting type or Sculpting type: The cutting type has a good power stability and strong adaptability; while the sculpting type has a quick response speed and good engraving effect. It can prolong laser tube’s service life.
3.Easy Control: The start and stop of laser can be easily controlled by TTL level.
4.The power supply has output open circuit protection.
5.This power supply has TTL signal indication, water Through signal indication and laser output indication.
Main Technical Parameters:
| AC Input Voltage | AC220V or AC110V | |
DC Input Voltage | DC300V or DC150V | |
AC Input Frequency | 47~440Hz | |
Voltage Output | 50KV | |
Maximum Current | 38mA (depending on the laser tubes of different manufacturers) | |
Efficiency | 91% | |
Overcurrent Protection | 130% of maximum current | |
Open Circuit Protection | Yes (short term) | |
Structure | Fan cooling | |
High Electric Level Control Voltage Range | ≥3V | |
Low Electric Level Control Voltage Range | ≤0.8V | |
Working Temperature | -30°C~+65°C | |
Relative Humidity | 20~85%RH(no condensation) | |
Voltage Resistance | Input—Output | AC1500V1minutes≤10mA |
Input—Shell | AC1500V1 minutes≤10mA | |
Output—Shell | Connection | |
Insulation Resistance | ≥50MΩ(DC500V) | |
Earth Leakage Current | ≤1mA(AC220V)≤0.5 mA(AC110V) | |
Vibration Resistance | Amplitude: 0.5mm frequency 10~55Hz3 dimensional direction 2 hours | |
MTBF | ≥30,000hours | |
Test Time at Full Load and 60°C | 12 hours | |
Power Supply Switch Test within 7 Seconds | 500 times | |
Maximum Dimensions (L*W*H) | 350mm*220mm*95mm | |
130w Co2 Laser Power Supply
