Minimum Order: 0
Quality/Safety Certification: 0.00
1. With CE certification power supplies
2.Soft-start current can reduce the AC input impact effectively
3.105 output capacitor
power supplies S-150 Series |
|
|
| 1.Low price and high reliability 2.105 output capacitor 3.AC input power suitable for the world 4.High efficiency and low operation temperature 5.Soft-start current can reduce the AC input impact effectively 6.With short-circuit and overload protection 7.Compact size, light weight 8.100% full-load burning test 9.Installed with EMI filter, minimum wave |
Model Specification | S-150-5 | S-150-7.5 | S-150-9 | S-150-12 | S-150-13.5 | S-150-15 | S-150-24 | S-150-27 | S-150-48 | DC output voltage | 5V | 7.5V | 9V | 12V | 13.5V | 15V | 24V | 27V | 48V | Output voltage error (Note2) | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | Rated output current | 30A | 20A | 16.7A | 12.5A | 11.2A | 10A | 6.5A | 5.6A | 3.2A | Output current range | 0-30A | 0-20A | 0-16.7A | 0-12.5A | 0-11.2A | 0-10A | 0-6.5A | 0-5.6A | 0-3.2A | Wave and noise(Note3) | 150mVp-p | 150mVp-p | 180mV | 180mV | 180mV | 180mV | 240mV | 240mV | 240mV | Inlet stability(Note4) | ±0.5% | ±0.5% | ±0.3% | ±0.3% | ±0.3% | ±0.3% | ±0.2% | ±0.2% | ±0.2% | Load stability(Note5) | ±0.5% | ±0.5% | ±0.3% | ±0.3% | ±0.3% | ±0.3% | ±0.2% | ±0.2% | ±0.2% | DC output power | 150W | 150W | 150.3W | 150W | 151.2W | 150W | 156W | 151.2W | 153.6W | Efficiency | 78% | 80% | 80% | 82% | 83% | 84% | 85% | 86% | 87% | Adjustable range for DC voltage | 4.5-5.5V | 6-8.3V | 8-10.4V | 10.6-13.2V | 12-15V | 13.5-16.5V | 21-28V | 24-30V | 43-53V | AC input voltage range | 85132VAC/176264VAC SELECTED BY JUMPER OR SWTCH 4763Hz;255370VDC | Input current | 3.2A/115V 1.6A/230V | AC impulse current | Cold-start current 35A/115V 60A/230V | Leakage current | <3.5mA/240VAC | Overload protection | 105%150 %TypePULSING HICCUP SHUTDOWN Reset: auto recovery | Over-voltage protection | 115%135% | High-temperature protection | | Temperature coefficient | ±0.03%(050) | Setup rise hold up time | 100ms,50ms,20ms | Vibration | 10500Hz,2G 10min./1cycle,Period for 60min,Each axes | Withstand voltage | Input and output interval3KVAC,Input and enclosure1.5KVAC,Output and enclosure0.5KVAC | Isolation resistance | Input and output interval,Input and enclosure,Output and enclosure500VAC/100M Ohms | Working temperature and humidity | -10+60,20%90%RH | Store temperature and humidity | -20+85,10%95RH | Overall dimension | 199*110*50mm | Weight | 0.8Kgs | Safety standards | Meet UL1012,TUV EN60950 Approved | EMC standards | Meet CLSPR22(EN55022), IEC801-2,3,4,IEC555-2 Verification | Note: 1.The testing condition for the parameter above is:230VAC input, rated load,25 70%Rh,Humidity 2.Error,include the setting error, line stability and load stability.(Note:5) 3.Wave test:adoptingA12double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage. 5.Load stability test: The load is from 0% to 100%,others 60%. 6.C2311must be knocked down. |
|