Welcome to B2BAGE
LED dual output AC to DC switching power supply D-60-B
LED dual output AC to DC switching power supply D-60-B

Minimum Order: 0
Quality/Safety Certification: 0.00

LED dual output AC to DC switching power supply D-60-B
CE approval, with better radiating effect
high quality, best serveice

LED dual output AC to DC switching power supply D-60-B

1.60W dual output switching power supply
2.Competitived price,Shortest lead time
3.Output:5V,12V and 5V,24V,sample available

 60W dual output switch power supply Competitived price and high reliability 105oC Output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effeciticly With short-circuit and overload protection Compact size, light weight 100% full-load burn-in test Installed with EMI filter, minimum wave

DC output voltage5V12V5V24V
Output voltage range(Note:2)±2%±6%±2%±5%
Rated output current4A3A3A1.8A
Output current range0.3-6A0.2-4A0.3-6A0.2-2.2A
Wave and noise(Note:3)75mVp-p150mVp-p75mVp-p150mVp-p
Inlet stability(Note:4)±0.5%±1%±0.5%±1%
Load stability(Note:5)±0.5%±4%±0.5%±4%
DC output power56W58W
Adjustable range for DC voltageCH1; +10, -5%CH1; +10, -5%
AC input voltage range85~264VAC ,47~63Hz;120~370VDC
Input current2A/115V 1A/230V
AC inrush currentCold-start current 30A//115V,60A/230V
Leakage current<1mA/240VAC
Overload protection105%~150% Type: pulsing hiccup shutdown Reset: auto recovery
Over-voltage protectionCH1: 5.75~6.75V
Temperature coefficient±0.03%/°c(0~50°c)ON+5V
Setup, rise , hold up time200ms,50ms, 20ms
Vibration10~500Hz, 2G 10min,/1cycle, Period for 60min, Each axes
Withstand voltageInput and output internal: Input and encolsur: 1.5KvAC, Output and enclosure: 0.5KvAC
Isolation resistanceInput and output internal: Input and enclosure, Output and enclosure:500VDC/100MΩ
Working temperature and humidity -10°c~+60°c(Refer to output derating curve), 20%~90%RH
Overall dimension159×97×38mm
Safety standardsUL 1950 TUV EN60590
EMC standardsCISPR22(EN55022)class B, IEC801-2,3,4 IEC555-2 Verification

Note:                                                                                                                                                                                         1. The testing condition for the paramenter above is: 230VAC input, rated load, 25 °c70% RH. Tempetature.

2. Error. include the setting error, line stability and load stability. (Note:5).

3. Wave test: adopting "A12" double wire for 20MHz, and 0.1 uf&47UF capacitor short-cicuit for interrupting.

4. Inler woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage.

5. Load stability test: The load is from 0% to 100%.

6. Total output canba maxinum Current, total load can not exceed the maxium output power.

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.