encolsed dual output switching power supply D-100-A, China encolsed dual output switching power supply D-100-A Supplier,Factory

encolsed dual output switching power supply D-100-A

Zhejiang Lierd Relays Enterprise Co., Ltd. [China]

Minimum Order: 0

Quality/Safety Certification: 0.00

encolsed dual output switching power supply D-100-A
CE approval, with better radiating effect
high quality, best serveice

encolsed dual output switching power supply D-100-A

1.100W dual output switching power supply
2.CE/ISO9001 certificate
3.Competitived price,good quality
4.Samples available

100W switching power supply Competitived price and high reliability 105oC Output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effeciticly With short-circuit and overload protection Compact size, light weight 100% full-load burn-in test Installed with EMI filter, minimum wave

Model	D-100A		D-100B
	CH1	CH2	CH1	CH2
DC output voltage	5V	12V	5V	24V
Output voltage range(Note:2)	±2%	±6%	±2%	±7%
Rated output current	15A	2A	15A	1A
Output current range	1-15A	0.3-2A	1-15A	0.2-1A
Wave and noise(Note:3)	100mVp-p	100mVp-p	100mVp-p	100mVp-p
Inlet stability(Note:4)	±0.5%	±1%	±0.5%	±1%
Load stability(Note:5)	±0.5%	±5%	±0.5%	±6%
DC output power	98W		99W
Efficiency	78%		80%
Adjustable range for DC voltage	CH1; +10, -5%		CH1; +10, -5%
AC input voltage range	88~132VAC/170~264VAC selected by switch 47~63Hz;120~370VDC
Input current	2.8A/115V 1.6A/230V
AC inrush current	Cold-start current 35A
Leakage current	<3.5mA/240VAC
Overload protection	105%~150% Type: pulsing hiccup shutdown Reset: auto recovery
Over-voltage protection	CH1: 5.75~6.75V
Temperature coefficient	±0.03%/°c(0~50°c)ON+5V
Setup, rise , hold up time	200ms,50ms, 20ms at full load
Vibration	10~500Hz, 2G 10min,/1cycle, Period for 60min, Each axes
Withstand voltage	Input and output internal: Input and encolsur: 1.5KvAC, Output and enclosure: 0.5KvAC
Isolation resistance	Input and output internal: Input and enclosure, Output and enclosure:500VDC/100MΩ
Working temperature and humidity	-10°c~+60°c(Refer to output derating curve), 20%~90%RH
Overall dimension	199×110×50mm
Weight	0.85Kgs
Safety standards	UL 1012, TUV EN60590(IEC950, UL 1950) Apporved
EMC standards	CISPR22(EN55022)class B, IEC801-2,3,4 IEC555-2 Verification
Note: 1. The testing condition for the paramenter above is: 230VAC input, rated load, 25°c 70% RH. Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5). 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inler woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%. 6. Total output canba maxinum Current, total load can not exceed the maxium output power.