encolsed dual output ac/dc switching power supply D-120-B
CE approval, with better radiating effect
high quality, best serveic
encolsed dual output ac/dc switching power supply D-120-B
1.120W dual output switching power supply
2.CE/ISO9001 certificate
3.Competitived price,good quality
4.Samples available
Model | D-120A | D-120B | ||
CH1 | CH2 | CH1 | CH2 | |
DC output voltage | 5V | 12V | 5V | 24V |
Output voltage range(Note:2) | ±2% | ±6% | ±2% | ±7% |
Rated output current | 12A | 5A | 6A | 4A |
Output current range | 2-12A | 0.5-5A | 2-10A | 0.4-4A |
Wave and noise(Note:3) | 60mVp-p | 120mVp-p | 60mVp-p | 150mVp-p |
Inlet stability(Note:4) | ±0.5% | ±1% | ±0.5% | ±1% |
Load stability(Note:5) | ±0.5% | ±5% | ±0.5% | ±6% |
DC output power | 120W | 126W | ||
Efficiency | 78% | 80% | ||
Adjustable range for DC voltage | CH1; +10, -5% | CH1; +10, -5% | ||
Input current | 2.5A/115V 1.25A/230V | |||
AC inrush current | Cold-start current 35V | |||
Leakage current | <3.5mA/240VAC | |||
Overload protection | 105%~150% Type: pulsing hiccup shutdown Reset: auto recovery | |||
Over-voltage protection | CH1: 5.75~6.75V | |||
Temperature coefficient | ±0.03%/°c(0~50°c)ON+5V | |||
Setup, rise , hold up time | 200ms,50ms, 20ms | |||
Vibration | 10~500Hz, 2G 10min,/1cycle, Period for 60min, Each axes | |||
Withstand voltage | Input and output internal: Input and encolsur: 1.5KvAC, Output and enclosure: 0.5KvAC | |||
Isolation resistance | Input and output internal: Input and enclosure, Output and enclosure:500VDC/100MΩ | |||
Working temperature and humidity | -10°c~+60°c(Refer to output derating curve), 20%~90%RH | |||
Overall dimension | 199×110×50mm | |||
Weight | 0.85Kgs | |||
Note: 1. The testing condition for the paramenter above is: 230VAC input, rated load, 25°c 70% RH. Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5). 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inler woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%. 6. Total output canba maxinum Current, total load can not exceed the maxium output power. |