Welcome to B2BAGE

Minimum Order: 0
Quality/Safety Certification: 0.00


AC Input Voltage Range  EMC   
90 to 264VAC   FCC Part 15 Class B 
AC Input Voltage Rating  EN55022 Class B  
100 to 240VAC   Isolation Test  
AC Input Current   Primary to Secondary: 3000VAC for 1 minute 10mA
0.15A(RMS) max. for 90VAC  Primary to F.G.: 1500VAC for 1 minute
0.05A(RMS) max. for 240VAC  Output to F.G.: 1500VAC 
Leakage Current   Immunity EN50082-1 
0.25mA max. @ 254VAC 60Hz  ESD: EN61000-4-2. Level 3 
AC Input Frequency   RS: EN61000-4-3. Level 2 
47-63Hz    EFT: EN61000-4-4. Level 2 
AC Inrush Current   Surge: EN61000-4-5. Level 3 
15A(RMS) max. for 115VAC  CS: EN61000-4-6. Level 2 
20A(RMS) max. for 230VAC  Voltage Dips EN61000-4-11 
OUTPUT:    Harmonic: EN61000-3-2 
Total Output Power   Insulation Resistance 
12W    Primary to secondary: >10M OHM 500VDC
Efficiency   Primary to FC: >10M OHM 500VDC 
80% (typical) at Max. load, and 120VAC 60Hz FEATURE:  
Hold-up Time   Over Voltage/Current, Short Circuit Protection
16mS min. 120VAC and max. load  The output can be shorted permanently without damage
Transient O/P Voltage Protection Indicators  
60V max. at switch on and off at any AC line PhaseLed #1 Indicator for fault-RED 
ENVIRONMENTAL:   Led #3 Indicator that Detected and Connected 
Temperature   to valid  IEEE802.3af load-GREEN
Operation 0 to +40°C   Input Connector  
Non-operation -25 to +65°C  IEC320 inlet 3 pin  
Operation 5 to 90%       

Ads by Google

Related Searches

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.