320W Switching Mode Power Supply
Minimum Order: 0
Quality/Safety Certification: 0.00
320W Switching Mode Power Supply
1.MODEL: S-320
2.INPUT:110V OR 220V
3.With CE Approval
4.DIMENSION: 215*115*50mm (L*W*H
320W Switching Mode Power Supply
Features:
AC input range selectable by switchProtections: Short circuit/Over load/Over voltage/Over temperatureForced air cooling by built-in DC fanCooling Fan ON-OFF auto control100% full load burn-in testFixed switching frequency at 90KHz
320W Switching Mode Power Supply SPECIFICATION:
| Model No. | Output | Tol. | R&N | Effi. |
| S-320-5 | 5V, 0~50A | ±2% | 150mV | 77% |
| S-320-7.5 | 7.5V, 0~36A | ±2% | 150mV | 80% |
| S-320-12 | 12V, 0~25A | ±1% | 150mV | 82% |
| S-320-13.5 | 13.5V, 0~22A | ±1% | 150mV | 83% |
| S-320-15 | 15V, 0~20A | ±1% | 150mV | 84% |
| S-320-24 | 24V, 0~12.5A | ±1% | 150mV | 86% |
| S-320-27 | 27V, 0~11A | ±1% | 200mV | 86% |
| S-320-48 | 48V, 0~6.5A | ±1% | 240mV | 87% |
OUTPUT
| RATED POWER | 320W |
| LINE REGULATION | ±0.5% |
| LOAD REGULATION | ±0.5% |
| SETUP, RISE, HOLD TIME | 2000ms, 20ms, 24ms at full load |
| OVERLOAD | 105 ~ 135% rated output power |
| Protection type : Hiccup mode, recovers automatically after fault condition is removed. | |
| OVER VOLTAGE | Protection type : Hiccup mode, recovers automatically after fault condition is removed. |
| FAN CONTROL O.T.P. | RTH1 ≥65ºC FAN ON, ≤55ºC FAN OFF, ≥70ºC (5 ~ 15V) |
| RTH1 ≥70ºC FAN ON, ≤65ºC FAN OFF, ≥80ºC (24 ~ 48V) | |
| Protection type : Hiccup mode, recovers automatically after fault condition is removed. |
| VOLTAGE RANGE | 88 ~ 132VAC / 176 ~ 264VAC by switch 248 ~ 370VDC |
| FREQUENCY RANGE | 47 ~ 63Hz |
| AC CURRENT | 6A/115VAC 3.5A/230VAC |
| INRUSH CURRENT (max.) | 18A/115VAC 36A/230VAC |
| LEAKAGE CURRENT | <3.5mA / 240VAC |
| WORKING TEMP. | -10 ~ +60ºC |
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing |
| STORAGE TEMP., HUMIDITY | -20 ~ +85ºC, 10 ~ 95% RH |
| TEMP. COEFFICIENT | ±0.03%/ºC (0 ~ 50ºC) |
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
| SAFETY STANDARDS | Design refer to UL1950 |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| MTBF | 188.7K hrs min. MIL-HDBK-217F (25ºC) |
| DIMENSION | 215*115*50mm (L*W*H) |
| PACKING | 0.939Kg; 12pcs/13.74Kg/0.0263CMB |
Mechanical Specification:
