Welcome to B2BAGE
CO2 laser power supply
CO2 laser power supply

Minimum Order: 0
Quality/Safety Certification: 0.00


Laser power supply
A,high voltage laser power supply
b,long life 10000 hours work time
c,connect very simple

Laser power supply specifications

 

   The power supply adopts zero-current half-bridge soft switching circuit, featurin high efficiency, fast response and easy matching for laser tubes produced by various manufacturers. Its ports can be controlled simply to adapt to high and low level signals; the switch of the laser can be controlled by TTL electrical level. Meanwhile, it has an additional abnormal protection switch to test external water supply, ventilation, etc.
The laser power can be adjusted by entering either 0 to 5V analog signals or PWM signals.
The power supply has open circuit protection function: under the well-grounding circumstances, it can work under open circuit state within short term to avoid laser power supply damages caused by laser tube burst.
Ex-factory Aging Test:
Each power supply should go through 12-hour, 60°C high temperature aging test under full load with 500 times power supply switch in 7 seconds.
 

                                               Main Technical Parameters

AC Input Voltage

AC220V or AC110V

DC Input Voltage

DC300V or DC150V

AC Input Frequency

47~440Hz

Voltage Output

50KV

Maximum Current

38mA (depending on the laser tubes of different manufacturers)

Efficiency

91%

Overcurrent Protection

130% of maximum current

Open Circuit Protection

Yes(short term)

Structure

Fan cooling

High Electric Level Control Voltage Range

≥3V

Low Electric Level Control Voltage Range

≤0.8V

Working Temperature

-30°C~+65°C

Relative Humidity

20~85%RH(no condensation)

Voltage Resistance

Input—Output

AC1500V1minutes≤10mA

Input—Shell

AC1500V1 minutes≤10mA

Output—Shell

Connection

Insulation Resistance

≥50MΩ(DC500V)

Earth Leakage Current

≤1mA(AC220V)≤0.5 mA(AC110V)

Vibration Resistance

Amplitude: 0.5mm frequency 10~55Hz 3D direction 2 hours

MTBF

≥30,000hours

Test Time at Full Load and 60°C

12 hours

Power Supply Switch Test within 7 Seconds

500 times

Maximum Dimensions (L*W*H)

350mm*220mm*95mm

 

 

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.