100W Battery Charger Power Supply(switching power supply)
Minimum Order: 0
Quality/Safety Certification: 0.00
100W Battery Charger Power Supply(switching power supply)
Input:110~ 220VAC Full range
Output:13.8V/13.3V, 27.6V/27.1V
100W Battery Charger Power Supply(switching power supply)
Features:
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage
Battery low and battery polarity protection
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at PFC 67KHz, PWM 134KHz
13.8V | 13.3V | 27.6V | 27.1V | |
10.5A | 0.5A | 5A | 0.5A | |
0 ~ 11.5A | ---------- | 0 ~ 2A | ---------- | |
151.55W | 153.92W | |||
150mVp-p | ---------- | 100mVp-p | ---------- | |
CH1:12 ~ 14.5V | CH1:24 ~ 29V | |||
±2.0% | ---------- | ±1.0% | ---------- | |
±0.5% | ---------- | ±0.5% | ---------- | |
±0.5% | ---------- | ±0.5% | ---------- | |
1000ms,90ms, 24ms/230VAC 2000ms,90ms, 20ms/115VAC at full load | ||||
88 ~ 264VAC 240 ~ 370VDC | ||||
47 ~ 63Hz | ||||
80% | 84% | |||
2.5A/115VAC 1.5A/230VAC | ||||
COLD START 20A/115VAC 40A/230VAC | ||||
<1mA / 240VAC | ||||
CH1:105 ~ 135% CH2:0.51 ~ 0.9A rated output power | ||||
Protection type: Constant current limiting, recovers automatically after fault condition is reove | ||||
CH1:15.87 ~ 18.63V | CH1:31.74 ~ 37.26V | |||
Protection type: Shut down o/p voltage, re-power on to recover | ||||
10V 0.8V | 19.5V(+1.5V,-1V ) | |||
-10 ~ +60ºC (Refer to output load derating curve) | ||||
20 ~ 90% RH non-condensing | ||||
-20 ~ +85ºC , 10 ~ 95% RH | ||||
±0.03%/ºC (0 ~ 50ºC) on CH1 output | ||||
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | ||||
Design refer to UL60950-1, TUV EN60950-1 | ||||
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||||
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | ||||
Compliance to EN55022 (CISPR22) Class B | ||||
Compliance to EN61000-3-2,-3 | ||||
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024,Light industry level, criteria A | ||||
183.3K hrs min. MIL-HDBK-217F (25ºC) | ||||
199*98*39mm (L*W*H) | ||||
0.578Kg; 30pcs/19.24Kg/0.0250CMB | ||||
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. |