100W Single Output Switching Power Supply,
Certificate: CE
Switching Power Supply,ac/dc adapter,power supply efficiency

100W Single Output Switching Power Supply   

Switching Power Supply,ac/dc adapter,power supply efficiency,high voltage power supply,power switching,change power supply,variable power supply

Low price and high reliability 105 output capacitor AC input power suitable for the world Hight efficiency and low operation temperature Soft-start current can reduce the AC input impact effecticly With Short-circuit and owwerload protection Compact size,light weight 100% full-load burning test Installed with EMI filter,minimum wave

                  Model
SpecificationS-100F-5S-100F-7.5S-100F-12S-100F-15S-100F-24S-100F-48DC output voltage 5V7.5V12V15V24V48VOutput voltage errorNote2

±2%

±1%±1%±1%±1%±1%Rated output current

20A

13.5A8.56.7A4.5A2.2AOutput current rage

0-20A

0-13.5A0-8.50-6.7A0-4.5A0-2.2AWave and noise(Note 3100mVp-p125mVp-p125mVp-p125mVp-p150mVp-p150mVp-pInlet stability(Note 4±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%Load stablity (Note 5±1%±0.5%

±0.5%

±0.5%±0.5%

±0.5%

DC output power 100W101W102W100.5W108W105.6WEfficiency76%78%80%81%83%84%Adjustable range for DC voltage +10%+10%+10%+10%+10%+10%AC input voltage range 85-132VAC /176~264VAC selected by swich 47~63Hz;248~370VDCInput current2A/115V 1A/230A AC INnrush current

Cold-start current30A/115V 60A/230V

Leakage current <1mA/240VACOverload proctection 105%-150%Type:Foldback:current limiting reset:auto recovery Over-voltage protection 115%-135High-temperature protection Temperature coefficient ±0.03%/0-50Setup rise hold up time 1s,30ms,15msVibration10-500Hz,2G 10min,/1cycle,Period for60min,Each axes Withstand voltage Input and output internal1.5KVAC,Input and enclosure1.5KVAC,Output and enclosure0.5KVACIsolation resistanceInput and output internal:Input and enclosure,Output and enclosure500VDC/100MΩWorking temperature and humidity -10~+60Refer to output derating curve,20%~90%RHStore temperature and humidity -20~+85.10%~95%RHOverall dimension199×98×38mmWeight0.65KgsSafety standards UL1012 TUV EN6050(IEC950,UL1950)ApprovedEMC standards CISPR22(EN55022),IEC801-2,3,4,IEC555-2 Verification Note
1.The testing condition for the paramenter above is :230VAC input,rated load,2570% RH.Humidity.
2.Error.include the setting error,line stability and load stability.(Note:5).
3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.
4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.
5.Load stability test:the load is from 0% to 100%.
6.C236must be knocked down.