Taper roller bearing
1)high precision and long life
2)low noise and vibration
3)ABEC-5
4,ISO9001:2000
Taper roller bearing, roller bearing 110TS9516 AA1702
TS (pressed steel cage)
1) SKF FAG NSK NTN Standard(2) ISO9001:2000
(3) ID size:20-1000mm
(4)Competitive priceThe projection lines of all the tapered surfaces meet at a common point on the bearing axis. Their design makes taper roller bearings particularly suitable for the accommodation of combined (radial and axial) loads. The axial load carrying capacity of the bearings is largely determined by the contact angle. The larger the angle, the higher the axial load carrying capacity. Taper roller bearings have the logarithmic contact profile that provides for optimum stress distribution over the roller/raceway contacts The special design of the sliding surfaces of the guide flange and large roller ends considerably promotes lubricant film formation in the roller end/flange contacts.
Advantages Of Taper Roller Bearings
Dimensional Stability Long Life Even In Contaminated Lubricant Durable Steel Cage Dimensionally Interchangeable With Other Bearing ManufacturersApplications Of Taper Roller Bearings
In many applications taper roller bearings are used in back-back pairs so that axial forces can be supported equally in either direction. Pairs of taper roller bearings are used in car and vehicle wheel bearings where they must cope simultaneously with large vertical (radial) and horizontal (axial) forces. Agriculture, Construction and Mining Equipment Various Axle Systems Conveyance Vehicles Gear Box, Engine Motors, Reducersfor shaft diameter
Features
in mm
302
15 - 220
main dimensions to ISO 355 / DIN 720, can be dismantled,
adjusted or in pairs
303
15 - 160
main dimensions to ISO 355 / DIN 720, can be dismantled,
adjusted or in pairs
313
20 - 150
main dimensions to ISO 355 / DIN 720, can be dismantled,
adjusted or in pairs
313..-N11CA
30 - 95
main dimensions to ISO 355 / DIN 720, can be dismantled,
for fitting in pairs in X arrangement, with axial internal clearance
320..-X
20 - 320
main dimensions to ISO 355 / DIN 720, can be dismantled,
adjusted or in pairs
322
17 - 260
main dimensions to ISO 355 / DIN 720, can be dismantled,
adjusted or in pairs
323..-A
17 - 150
main dimensions to ISO 355 / DIN 720, can be dismantled,
adjusted or in pairs
323..-B
35 - 85
main dimensions to ISO 355 / DIN 720, can be dismantled,
adjusted or in pairs
329
120 - 300
main dimensions to ISO 355 / DIN 720, can be dismantled,
adjusted or in pairs
330
45 - 120
main dimensions to ISO 355 / DIN 720, can be dismantled,
adjusted or in pairs
331
40 - 90
main dimensions to ISO 355 / DIN 720, can be dismantled,
adjusted or in pairs
332
25 - 85
main dimensions to ISO 355 / DIN 720, can be dismantled,
adjusted or in pairs
T2EE
60
main dimensions to ISO 355, can be dismantled,
adjusted or in pairs
T4CB
120 - 140
main dimensions to ISO 355, can be dismantled,
adjusted or in pairs
T4DB
170 - 200
main dimensions to ISO 355, can be dismantled,
adjusted or in pairs
T5ED
65 - 100
main dimensions to ISO 355, can be dismantled,
adjusted or in pairs
T7FC
45 - 90
main dimensions to ISO 355, can be dismantled,
adjusted or in pairs
K-Series
17,462 - 89,975
in inch sizes, can be dismantled, adjusted or in pairs