1.single mode single fiber
2.Support auto-negotitation
3,Humidity:10% to 90% no condensing
4,long distance transmission
10/100M BIDI Ethernet Media ConverterDescription:
The XTR100-LD13(15) series consists of a series of 10/100Base-TX to 100Base-FX
Auto-negotiation mode Media Converter. User now may upgrade or extend their existing
100Base-TX or even 10Base-T network into fiber network easily.
XTR100-LD13(15) series are fully compliant with IEEE802.3 Ethernet standard. The RJ45
(STP) port of XTR100 support auto-negotiation functions, provide a maximum bandwidth of up to
200Mbps (100M full duplex) or up to 20Mbps (10M, full duplex) for distances of up to 2Km -
when using multimode fiber cable; or up to 100km - when using single-mode fiber cable.
Installation and operation of the XTR100-LD13(15) is simple and straightforward.
Bi-Di 10M/100M Media Converter
Specifications:
The Converter conforms to the following standards:
Standards: IEEE802.3u 10/100Base-TX and 100Base-FX
Connectors ( RJ45-UTP/STP and Fiber SC )
Data Transfer Mode: 100Mbps
Power Requirement: 1A@+5VDC
Operation Temperature: -10°C to 65°C
Storage Temperature: -40°C to 70°C
Humidity: 10% to 90% no condensing
Dimensions: 94 X 70 X 25 mm ( L x W x H )
UTP Cable: Cat.5 cable up to 100m
Fiber Cable: 50/125,62.5/125 or 100/140μm multi-mode
8.3/125,8.7/125,9/125 or 10/125μm single-mode
Optical Power Receive Sensitive
Media Converter
Production Information
1. Overview
The 10/100Base-TX Fast Ethernet Converter is fully compliant with all IEE802.3&802.3u
standards.
This converter is available in SIX different Models:
Six LED display instant status monitoring for Power, Full-Duplex, FX Link, FX Activity, TX Link,
TX Activity.
2. Checklist
Your XTR100 series carton should contain the following items:
XTR100-S13/L13 or XTR100-S85 or XTR100-LD, etc.
AC-DC Power Adapter
This User’s Guide
Please notify your sales representative immediately if any items are missing or damaged.3. Installation
For as a stand-alone unit:
→ Verify the AC-DC adapter conforms to your country AC power requirement and inset the
power plug
→ Connect the media cable for network connection
For as a slide-in unit:
→ The slide in media Converter and Converter Rack Should be supplied only from the same
source, Both Media Converter
→ Verter and rack are built to match each other at dimensions, DC receptance and power safety
→ Turn off the 19” converter rack power
→ Ensure that there is no activity in the network
→ Locate +5VDC power jack on converter back, carefully slide in and plug to 19” racd+5VDC
power receptacle