Ultraonsic Heat sensor
Small size;multi function
Low consumption
Large measuring range
Several output/input

 Ultrasonic Heat sensor technical parameters:

 

Powerful Functions The parameters  can setted by users
    Current output: 4-20mA, one channel, can be used for flow/heat transmitter; OCT output: two channel, can be used for flow / heat switch; Current input: 4-20mA, three channel, can be used for data collector; Tri-wire resistance signal input (PT100): two channel, can be used for calorimeter.Far transmission distance
    Connect flow/heat module and secondary meter through RS-485 interface, transmission distance up to 1000m. Solve the problems of high cost of special cable, poor anti-interference, short transmission distance etc.Wide measuring range
    Several types transducer for selection, pipe size from DN15mm to DN6000mmHigh Accuracy measuring
    Accuracy: ±1%, linearity: 0.5%, repeatability: 0.2%

Clamp-on					Flow±1% Heat±2%
High-tem clamp-on
Insertion
Prover Section			DN15-1000mm (see appendix 2)
	signal input (PT100)
	output 1 channel isolation 4-20mA output (two-wire system)
	protocol and general water meter protocol.