Insulation Oil Testing System:
1.industrial single chip.
2.Detection with high precision.
Insulation Oil Testing System:
Application:
In the electric power industry, transformer oil is wildly applied in electric substation. The dielectric strength is a comprehensive index for transformer oil. Series IIJ-II oil tester is special for testing transformer oil’s dielectric strength. IIJ-II Automatic oil tester is designed according to IEC156 international standard and adopts industrial single chip as controller, apply large integrate circuit, new type I/O interface, LCD displayer, built-in printer etc. IIJ-II transformer oil tester also combines with special testing and anti-jamming technologies which greatly improve the tester’s performance.
Features:
1. Simple operation, high degree of automation (just press a button)
2. Using the menu management, easy to understand the input parameters
3. Can store 99 groups oil sample test data to facilitate future access to and print, test data can be stored in power off state for 10 years.
4. The system clock in the power off state can continue to run.
5. Anti-interference ability
6. Detection with high precision
7. Small size, light weight, easy operations
Technical Parameters:
Power supply | AC220V±10%,50Hz |
Output voltage | 0~100KV(60KV,80KV,100KV) |
Capacity | 1.2KVA(1.6KVA,2.0KVA) |
Speed of pressure rise | about 2KV/S |
Voltage test precision | ±3% |
Breakdown sensitivity | <2KV |
Wave difference | ≤3% |
Time of breakdown | ≤10ms |
Working condition- temperature | 0°C~40°C |
- humidity | The biggest comparatively humidity85% |
Reserve circumstance- temperature | -20°C~60°C |
- humidity | The biggest comparatively humidity75% |
- Working altitude | <1500m (if over 1500m can be designed specially) |
Dimension | 480mm*460mm*460mm |
