Cutting machine
Easy to operate
Suitable for many kinds of knife
For Tensile, Rheometer and Mooney Viscometer
Cutting machine for rheometer, mooney viscometer,tensile
Cutting machine/rheometer/mooney viscometer
Usage:
This machine can make samples for Tensile, Rheometer and Mooney Viscometer. It is easy to operator and suitable for many kinds of knife.
Specification:
Items | Specification |
CM-02 | Pneumatic type |
Input air pressure | ≥ 0.5Mpa |
Cutting pressure | 7KN force under the input pressure of 0.6Mpa |
Cutting travel | 50mm |
Size (W×L×H) | 340×220×500 (mm) |
Operation | Two hands control mode by two buttons |
Weight | 25kg |
Default configures:
Main part ------ 1 piece
Basis Nylon board ------ 1 piece
(Note: knives are not included in the default configures, they can be chosen by the buyer)
Optional knives and manual:
knives can be fixed to the cutting machine or just put on the samples and can be moved.
1 Cutting with the fixed knives:
Fixed the knife to the cutting machine, put the Nylon board on the lower base of the cutting machine, put the sample on the Nylon board and adjust it to the centre of the knife. Press the left button by left hand and then press the right button by right hand. Knife will be moved down and cut the sample. When finished cutting, loose the right hand, knife will be moved up to the initial place and then loose the left hand. The sample will be removed from the knife automatically.Fixed knives:2 Cutting with the moved knives:
There is a plate fixed to the cutting machine. put the Nylon board on the lower base of the cutting machine, put the sample on the Nylon board and then put the knife on the right place of the sample, adjust it to the centre of the plate. Press the left button by left hand and then press the right button by right hand. Plate will be moved down and press on the knife, then cut the sample. When finished cutting, loose the right hand, plate will be moved up to the initial place and then loose the left hand. Moving the sample from the knife by hand.Moved knives:
Common size for Dumb-bell knives:
Cutter | Size | ||
Length | width | height | |
Dumb-bell I | 150 | 10 | 35 |
Dumb-bell II | 120 | 10 | 35 |
Dumb-bell III | 115 | 6 | 35 |
Note: Other knives, if the size can be less than (160*60*35)mm, can be used under this cutting machine
Notice and Maintain
When cutting, ensure that the surface of the knife blade parallel to the surface of the nylon board .When cutting, the knife blade cannot be touched on hard materials, to avoid being damaged.If for long time not using, the knife shall be antirust by oil. The press air need be clean before into the machine. when not using, the cutting machine need to be covered with the dust cover and anti-oil, dust, erosion.Cutting machine for rheometer, mooney viscometer,tensile
Cutting machine/rheometer/mooney viscometer