Diesel Fuel Injection Pump Test Bench 12PSB-A Short Introduction Digital display rotation, temperature, time, pressure, and rack travel etc. Test range: Diesel mechanical pump including inline pumps and rotary pumps. Power: 7.5kw, 11kw, 15kw, 18.5kw, 22kw Voltage: 380v or 220v available Can work with CRS-C/D to test common rail injectors or pumps Feature 1. Ten kind of rotation speed presetting 2. Rotation controlled by inverter, and motor drive 3. Digital display rotation, temperature, time, pressure, and rack travel etc. 4. Automatic control of fuel temperature 5. D.C. power equipped 6. Protection system of over pressure, over load and over heat 7. Emergency switch available 8. Same operation board on right/Left side 9. Force air cooling system (optional) 10.Advance angle testing (optional) 11. Low noise, high efficiency and energy saving Function 1. Test fuel supply in every cylinder under different rotation speed 2. Test fuel injection quantity of each cylinder 3. Test the performance of mechanical speed governor 4. Test the solenoid of distributor pumps 5. Test the performance of pneumatic speed governor 6. Test the performance of pressure compensators 7. Test inner pressure of distributor pump 8. Test negative pressure performance of pneumatic film speed governor 9. Test sealing performance of fuel injection pump Parameter 1. Rotation speed: 0-4000 rpm/min 2. Fuel Tank volume: 60L 3. Automatic control of fuel temperature: 40±2℃ 4. Test fuel filtering precision: 5µ 5. D.C. supply: DC12V/24V 6. Fuel supply pressure: Low pressure: 0-0.4MPA; High pressure: 0-4MPA 7. Air pressure: 0-0.3MPA 8. Power supply: 380V-three phase/220V; 7.5-22KW 9. Flywheel inertia: 0.8KG•M² 10. Center height: 125MM