pipeline x ray crawler
1 Accurate& long life
2 Philip original battery
3 Regulatory function of KV
4 Good self-protection
pipeline x ray crawler
Features:
1 X-ray Generator system has a regulatory function of KV with large diameter and thick walled tube has the regulatory function. Tran illumination to ensure the X-ray film and degree of consensus.
2 Electronic speed control motor function, to achieve constant torque, constant current operation, could be 40 percent energy saving at the same time motor over current protection.
3 Automatically inspect the energy of battery. When the voltage of battery is not enough, the crawler will turn back in time .
4 It has various real-time function to protect the x-ray generator in case of meeting water, over-voltage, zero voltage, over-current, zero current, meeting barrier, antenna falling off, X-ray generator falling off, over temperature.
5 Instead of γ-source location, it adopts radio microwave video location, which is safer, more direct-viewing, and location-accurate.
6 It has a continuous contact with runner in order to show the inner situation clearly. e.g.: NDT Equipment fault, battery State LOW, over tempered inner pipeline, distance to the pipe mouth.
7 It has the automatic stop function, with no need of Real Time Monitoring.
Main Technical specifications
Model | ZY-4C | ZY-3C | ZY-10C | |
Limit of applicable pipe-diameter (mm) | Φ219~Φ377 | Φ323~Φ630 | Φ529~Φ1200 | |
Outline dimension of creeping instrument (mm) | 1600×260×240 | 1400×290×260 | 1430×340×290 | |
Dimension of instruction controller (mm) | Micro-wave video | 420×470×240 | 420×470×240 | 420×470×240 |
Magnetic medium control | 190×170×110 | 190×170×110 | 190×170×110 | |
Weight (Kg) | 30 | 67 | 90 | |
Creeping Speed (m/min) | 15~18 | 15~18 | 15~18 | |
Location error (mm) | ±5 | ±5 | ±5 | |
Maxima climbing slope | 10~15° | 15~25° | 30~40° | |
Ray radiation angle | 360×40°C | 360×40°C | 360×40°C | |
Operate temperature | -20°C~60°C | -20°C~60°C | -20°C~60°C | |
Relative humidity | 90% | 90% | 90% | |
pipeline crawler configuration
No. | Item | Quantity |
1 | Climb car | 1 |
2 | X-ray Generator system | 1 |
3 | Command controller | 1 |
4 | Battery and cell box | 1 |
5 | Changer | 1(120V) |
6 | Supporting plate | 2 |
7 | CCD camera | 1 |
8 | lifter slide | 2 |
9 | connecting cable | 2 |
10 | Short sleeves | adapting |
11 | Extension Shaft | adapting |
