FKC-1-type planktonic bacteria dust air sampling is a highly efficient porous dust inhaled bacteria sampler.

 Use of environmental :

1. Temperature :10 - 35
2. Relative humidity :10 - 90% RH
3. Atmospheric pressure :80-110kPa
4. Maximum dust concentration: 100 million / m³ @ 0.5μm or 0.2mg / m³
5. Maximum wind speed: 1m / s

The main characteristics and parameters:

1. Sampling head for the numerous porous,   so that uniform distribution of micro-organisms in the agar surface, reducing the duplication of dust bacteria and reduce the microbial count error.
2. Sample flow: 100L/min.
3. Sampling flow rate of the first population: 0.38m / s and the clean room is basically the same as the wind speed (isokinetic sampling).
4. Sample volume can be from 0.01-2.0m ³ arbitrary.
5. Petri dish using a standard GM Φ90 * 15
6. Power: AC-DC dual-use, rechargeable battery DC6V, filling a row after the wires for the work of 4h.
7. Dimension: Φ120 * 300.
8. Weight: 2kg

Structural features that

1. Sampling head for the numerous porous, so that uniform distribution of micro-organisms in the agar surface to reduce the structural features of note
1. Sampler is composed of two parts from top to bottom, for sampling the upper part of head, dish Block, sampling pumps, sampling pump, Block, sampling pump power. Lower for the control panel, memory, LCD display, keyboard, battery components, see fig.
2. Sampler can be AC-DC dual-use, after the equipment has a switch and the bottom of a jack (see Figure), when DC use open switch from battery-powered; when the exchange will use a random configuration of the 6V DC power jack to insert the above-mentioned, When the switch is not opened in a state-of-charge at this time, when the switch is open, by the 6V power supply and maintain state-of- charge.