LGFZ series load bank are ourselves-developed for test load application in various electric devices test .

  Main parameters and fitting

1Resistance load equipment: 212.5KW

2Power factor: 1.0

3Test voltage: three phase AC voltage 415V

4Frequency: 50--60Hz

5Active power step:

2.5KW       X       1 step          5KW X  2 step

10KW  X       2step          20KW      X  5 step

40KW   X      2step      

6Normal Operational Conditions

In summer the ambient temperature is 45,humidity is 90%.In winter the ambient temperature is -20, humidity is 50%

7ventilation power and the control power of the load bank are 3 phase 5 wire ( 380V+N+PE).

8Cooling mode: forced air convection, the fanner with axial-flow, the direction of the air is coming from the bottom and outgoing from the above.

9Controlling mode: Manual control.

10Load bank rated power error: thermal state: ±4, cold state: ±2.

11Protection device: over-current, short-current, over-load protection for the fanner. With short circuit and over load protection for resistance pile.

12) The temperature for load bank outlet is about 250, temperature for enclosure is 5-10 higher then normally temperature, with partition for resistor and enclosure.

13) IP Degree for main loop IP20

14) Insulation degree for motor: F

15)Working mode: continuous

Main units

1, DC500V 100MΩ,AC2000V/,: ±2%.

   1resistance tube: we selected self developed stereo-type resistance unit, the unit impedance is above DC500V 100MΩ,the withstand voltage is AC2000V/minitue,each resistance tube resistance error is ±2%2

2the fanner with axial-flow

3instrument: ATREMC instrument ACR200E with RS-485

5Transformer: ALH-0.66 of Changjiang of Jiangyin city