1.Tiles, glazed porcelain tile, floor tile
2.Nano finish option
3.Size: 15X60CM,60X50CM,30X60CM
4.Thickness: 10M
Stock tiles, Polished tiles, floor tiles.
1. This is the best tile for hotel, airport, Department stores, Residential buildings, big project etc.
2. Packing details:
a) 400*400MM 10pcs/ctn, 30kg/ctn, 1.60Sqm/ctn;
b) 300*600MM 8pcs/ctn, 30kg/ctn, 1.44Sqm/ctn;
c) 600*600MM 4pcs/ctn, 30kg/ctn, 1.44Sqm/ctn;
d) 800*800MM 3pcs/ctn, 50kg/ctn; 1.92Sqm/ctn;
e)1000*1000MM 2pcs/ctn, 60kg/ctn; 2.00Sqm/ctn
3. Delivery Time: 15days
4. We have many different color and different design in this series. Please kindly check our website.
5. Our price is very competitive with very good quality;
6. We have CE, ISO9001, Soncap, SASO for most of our tiles.
7. It's available in polished, super glossy, matt finish, etc.
8. Below are the inspection report:
| Inspection Report | |||||||
| Test Basis on ISO13006 | |||||||
| Item No.: black & white | |||||||
| Test Description | Test Method | ISO13006 BIa | Test Result | ||||
| Limit | |||||||
| Surface (CM2) s | |||||||
| s>410 | |||||||
| Length and Width The manufacturer shall choose the work size as follows: a) for modular tiles in order to allow a nominal joint width of between 2mm and 5mm1); b) for non-modular tiles so that the difference between the work size and the nominal size is not more than ±2%(max. ±5mm). The deviation, in percent, of the average size for each tile (2 or 4 sides) from the work size (W). | ISO10545-2 | 600±1.0 | 600.1 ~ 600.4 | ||||
| The deviation, in percent, of the average size for each tile (2 or 4 sides) from the average size of the 10 test specimens (20 to 40 sides). | ISO10545-2 | ±0.5% | / | ||||
| Thickness | a) The thickness shall be specified by the manufacturer. | ISO10545-2 | - | / | |||
| b) The deviation, in percent, of the average thickness of each tile from the work size thickness. | ±5% | / | |||||
| Straightness of sides (facial sides) The maximum deviation from straightness, in percent, related to the corresponding work sizes. | ISO10545-2 | ±0.2% | -0.03 ~ +0.04% | ||||
| Rectangularity The maximum deviation from rectangularity, in percent, related to the corresponding work sizes. | ISO10545-2 | ±0.2% | -0.02 ~ +0.03% | ||||
| Surface flatness The maximum deviation from flatness, in percent: | a) central curvature, related to diagonal calculated from the work sizes; | ISO10545-2 | ±0.2% | -0.04~ +0.04% | |||
| b) edge curvature, related to the corresponding work sizes; | ±0.2% | -0.04 ~ +0.06% | |||||
| c) warpage, related to diagonal calculated from the work sizes. | ±0.2% | -0.05~ +0.04% | |||||
| Surface Quality | ISO10545-2 | A minimum of 95% of the tiles shall be free from visible defect that would impair the appearance of a major area of tiles | Conformed | ||||
| Water absorption Percent by mass | ISO10545-3 | ≤0.5% individual maximum 0.6% | 0.23% 0.16~0.30% | ||||
| Breaking strength, in N | a) thickness ≥ 7.5mm | ISO10545-4 | Not less than 1300 | 1607.4N | |||
| b) thickness < 7.5mm | Not less than 700 | / | |||||
| Modulus of rupture, in N/mm2 Not applicable to tiles with breaking strength ≥ 3000 N | ISO10545-4 | Minimum 35 Individual minimum 32 | 39.6MPa 38.0~43.6MPa | ||||
