wireless remote controller
1.time lapse
2.1 to 99 seconds or minutes
3.12V,220V
4. visiable adjust freely
Model No.: DL-CS2015LT
Description: freely time adjust wireless remote controller
1. Product Detail:
DL-CS2015LT is a 2CH RF Wireless intelligent Remote Control Switch with time lapse (1 second to 99 seconds or 1 minute to 99 minutes adjustable seperately) function at momentary control mode. It is widely used in electrical operated gate, window, crane devices, barrier, lifter, industrial control and security industry etc (especially for the switch over from wire garage, window and anti-theft system to wireless one).
2. Technical specification:
| Description | Parameter |
1 | Operating Voltage | 12V/24V DC |
2 | Control voltage and current: | 7A 240VAC | 10A 24VDC |
3 | Static Current | =< 6mA |
4 | Frequency | 433 MHz |
5 | Sensitivity | >= -105 dB |
6 | Output voltage | Optional DC / AC |
7 | Operating Temperature | -40 to 80 deg C |
8 | Decode IC | MCU(decode learning code) |
9 | Time lapse | 1 second to 99 seconds or 1 minute to 99 minutes adjustable |
10 | Dimension (w, h, d) | PCB: 84*73*24MM Case: 100*80*28mm |
11 | G.W.(include case) | 130g |
3. Procedure to Learn and Erase Codes
a) Keep pressing the learn button until the led blink and extinguish, which indicates previous learned codes have been erased.
b) After erasing the code, the led will flash slowly, press the “Learn” button on the receiver board when the led is off, keep pressing until the led is on, then release, indicating the receiver is ready and waiting to learn from transmitter.
c) Press the remote, the led will blink, that means the code has been learnt..
4. Operating details:
Output Mode selection.
| J2 | J1 | Output Mode |
i | Open | short | Toggle |
ii | open | open | Momentary |
iii | short | Open | Interlock |
5. Wiring diagram:
