1.Inflate up to 4 tires simultaneous;
2.Automatic Tyre Inflater;
3.Over Pressure Setting(OPS);
4.174PSI/12bar/1200kPa

Automatic Tyre Inflater

Technical Data Summary

Dimensions(Height*Width*Depth)  510mm*230mm*120mm

                                                  20.1''*9.1''*4.7''

Net Weight                                  6kg/13.2lbs

Gross Weight                              14.5kg/32lbs

Packing Size(Height*Width*Depth)200mm*580mm*480mm

                                                 7.9''*22.8''*18.9''

Power Requirement                     100-240Vac  50 / 60HZ

Power Consumption                     23VA

Operating Temperature Range      -20/-4°F to 70 / 158°F

Max Inlet Air/Nitrogen Supply       217PSI / 15bar / 1500kPa

Operating Range                         5-174PSI/0.3-12bar/35-1200kPa

Over Pressure Setting Range       0-29PSI/0-2.0bar/0-200kPa

Accuracy                                   ±1PSI/0.07bar/7kPa

Resolution                                 1PSI/0.1bar/5kPa

Units of Measurement              PSI/bar/kPa

Specifications:

1. Adjustable over pressure setting(OPS)

2. 4 air outlets allow simultaneous inflation of up to 4 tires

3. Auto-Start inflation

4. Automatic zero drift adjustment

5. Remain at last setting

6. Comprehensive diagnostics and error reporting

7. Audible and visual end of the cycle signal indicators

8. Large backlight LCD display

9. Vandal resistant mechanical switches

10. Suits Standard nitrogen bottle/Direct nitrogen supply from generator/Air compressor

11. 4 Nos.*10M/32.8ft standard hoses with single clip-on open type chuck

12. 1400mm/55.1 grey mounting steel stand base Supplied separately

Detail Description of OPS:

Over Pressure Setting(OPS)

When fitted,the bead of the new tyre must be seated on the wheel rim.This is done via inflating the tyre past the required pressure until the bead is in place.The pressure needs to then be reduced to the required pressure.Traditionally this is done manually and is therefore time consuming for the operator.The OPS function allows the operator to set the amount of over pressure between 0 and 2 bar/29psi/200kPa.The unit will then over inflate the tyre by the set amount before automatically deflating back to the final pressure required.