1.Corrosion resistance
2.Diameter: 6mm-450mm
3.OEM Manufacturer
4.High tensile strength
5.High heat resistance
1.Titanium bar flow chart:
Titanium sponge→Crushing→Melting→Forging→Rod billet→Precision Forging→Mechanical working→Titanium bar
Standard: ASTM B348, ASTM B381, AMS 4928 ect.
2.Grade 5 widely used in the titanium alloys because of its comprehensive mechanical, physical and chemical properties.
Chemical requirements
| N | C | H | Fe | O | Al | V | Pa | Mo | Ni | Ti |
Gr 1 | 0.03 | 0.08 | 0.015 | 0.20 | 0.18 | / | / | / | / | / | bal |
Gr 2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | / | / | bal |
Gr 3 | 0.05 | 0.08 | 0.015 | 0.30 | 0.35 | / | / | / | / | / | bal |
Gr 4 | 0.05 | 0.08 | 0.015 | 0.50 | 0.40 | / | / | / | / | / |
|
Gr 5 | 0.05 | 0.08 | 0.015 | 0.40 | 0.20 | 5.5~6.75 | 3.5~4.5 | / | / | / | bal |
Gr 7 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | 0.12~0.25 | / | / | bal |
Gr 9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5~3.5 | 2.0~3.0 | / | / | / | bal |
Gr12 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | 0.2~0.4 | 0.6~0.9 | bal |
Tensile requirements
grade | Tensil strength(min) | Yeild strength(min) | Elongation(%) | ||
ksi | MPa | ksi | MPa | ||
1 | 35 | 240 | 20 | 138 | 24 |
2 | 50 | 345 | 40 | 275 | 20 |
3 | 65 | 450 | 55 | 380 | 18 |
4 | 80 | 550 | 70 | 483 | 15 |
5 | 130 | 895 | 120 | 828 | 10 |
7 | 50 | 345 | 40 | 275 | 20 |
9 | 90 | 620 | 70 | 438 | 15 |
12 | 70 | 438 | 50 | 345 | 18 |
3.Service:
a. Customers can know your order status from our web or service personnel
b. We promise we'll replace the materials for the same at our cost
c. We have the Delay Shipment Recovering Fund, which allows us transport the products on time
d. Test:Provide Bao Ti Center Physical and Chemical Test Report or Northwest Institute For Non -ferrous Metal Research Test Report.
4.We also offer these products as follows:
titanium clad copper, titanium/nickel/chromium tube/sheet/round target, titanium standards parts, titanium bolts,titanium/nickel/zirconium sheet/tube.
