EOC(OZ) milling Collet Chuck Sets DIN6388 MAS403
Minimum Order: 0
Quality/Safety Certification: 0.00
EOC(OZ) milling Collet Chuck Sets DIN6388 MAS403
made of 65Mn .
hardness: HRC44-48
EOC(OZ) milling Collet Chuck Sets DIN6388 MAS403
made of 65Mn .
hardness: HRC44-48
.
| EOC(OZ)25 | 7PCS/SET | 6;8;10;12;16;20;25mm |
| 15PCS/SET | 3;4;5;6;7;8;9;10;11;12;13;16;18;20;25mm | |
| 1/8;3/16;1/4;5/16;3/8;7/16;1/2;9/16;5/8;11/16;3/4;13/16;7/8;15/16;1″ | ||
| EOC(OZ)32 | 8PCS/SET | 6;8;10;12;16;20;25;32mm |
| 15PCS/SET | 6;7;8;9;10;11;12;13;16;18;20;25;30;32mm | |
| 1/4;5/16;3/8;7/16;1/2;9/16;5/8;11/16;3/4;13/16;7/8;15/16;1″;1-1/8″;1-1/4″ |
| EOC(OZ)25:3-25mm(1/8″-1″); D:35.05; L:52; Taper:1:10; Weight:0.18KGS | |||
| Size of shank | Back Bar Thread | Qty. of Collets | Weight per set |
| MT2 | M10×1.5P | 7PCS | 3.6KGS |
| 15PCS | 5.1 | ||
| MT3 | M10×1.5P or | 7PCS | 3.7 |
| M12×1.75P | 15PCS | 5.2 | |
| MT4 | M16×2.0P | 7PCS | 3.9 |
| 15PCS | 5.4 | ||
| MT5 | M24×3.0P | 7PCS | 4.7 |
| 15PCS | 6 | ||
| R8 | 1/16″-20 | 7PCS | 3.7 |
| 15PCS | 5.2 | ||
| NT30 | M10×1.5P or | 7PCS | 4 |
| M12×1.75P | 15PCS | 5.5 | |
| NT40 | M16×2.0P | 7PCS | 6.5 |
| 15PCS | 8.5 | ||
| NT50 | M24×3.0P | 7PCS | 3.7 |
| 15PCS | 5.2 | ||
| BT40-100L | M16×2.0P | 7PCS | 4.4 |
| 15PCS | 5.9 | ||
| BT50-80L/150L | M24×3.0P | 7PCS | 7.5 |
| 15PCS | 9.5 | ||
