Smart Charger
1. Input voltage: DC 11-15V
2. Input Current: 1.5A
3. Single full battery voltage: 4.20

Specifications

1. Input voltage: DC 11-15V

2. Input Current: 1.5A

3. Single full battery voltage: 4.20 ± 0.05V

4. Repair voltage: 1.50v-3.00v/Cell

5. Voltage added: 4.16V/Cell

6. Charge current: 1.0A ± 0.1A

7. Repair current: 200 mA

8. Balance current: 200 mA

9. Repair bad battery time: 3min

Charging Process

1. Connect the charger with power supply, then the power indicator lights up, which indicates that the power connection is normal.

2. Connect the 2 cells or 3cells Li-polymer battery with charging ports of the charger, then the red charging indicator lights up and it indicates the battery is on charge.

3. The red charging indicator turns green shows that the battery is full.

Charge Notices

1. After connecting the power, the power indicator gets light; otherwise, it indicates that power connection goes wrong.

2. After connecting the battery with charger, the charge indicator should turn red, and it indicates that battery is on charge, otherwise, please check whether the battery has been damaged.

3. The charge indicator gets constant green after the charge finished. If the battery has not been unplugged for a long time after charge finished, the battery would be recharged as the single battery voltage is lower than 4.16V after self- discharge.

4. Keep it away from children and take the battery out from the helicopter while charging.
5. Fire or serious injury would be resulted in under certain conditions. so please follow the instructions and never leave equipment unattended while charging.
6. Keep the battery charged in cool and ventilating place and be away from heat source, flammable and explosible materials.
7. To ensure secure and quick charging, please use Southtop original chargers.