Aeromodelling motor
Remote control plane motor
Radio control plane motor
Weight: 33g Approx
ISO/TS16949 certified company
The models we list below are part of our existing designs. We offer specific motor design for every customer.
Model No. | Main Performance | |||||||||
Rated Voltage | No Load | At Maximum Efficiency | At Stall | |||||||
Speed | Current | Speed | Current | Torque | Output | Eff. | Current | Torque | ||
V | r/min | A | r/min | A | g.cm | W | % | A | g.cm | |
FK-180PH-3344 | 9.6 CONST | 32,500 | 0.5 | 27,780 | 2.95 | 63.8 | 18.21 | 64.3 | 17.4 | 440 |
FK-180PH-12290 | 24.0 CONST | 12,500 | 0.06 | 10,415 | 0.3 | 46.7 | 5.0 | 69.4 | 1.5 | 280 |
FK-180PH-3536 | 7.2 CONST | 30,000 | 0.52 | 25,640 | 3.06 | 48.6 | 12.8 | 58.2 | 18 | 335 |
FK-180PH-4223 | 3.0 CONST | 19,500 | 0.72 | 16,450 | 3.89 | 48.4 | 8.18 | 70.2 | 21 | 310 |
FK-180PH-3145 | 7.2 CONST | 24,000 | 0.44 | 20,490 | 2.57 | 51.2 | 10.77 | 58.2 | 15 | 350 |
FK-180PH-12275 | 6.0 CONST | 3,000 | 0.043 | 2,238 | 0.13 | 16.5 | 0.38 | 50.3 | 0.37 | 65 |
FK-180SH-11320 | 16.0 CONST | 7,500 | 0.20 | 6,000 | 0.20 | 28.6 | 1.79 | 55.9 | 0.8 | 145 |
FK-180SH-10360 | 12.0 CONST | 5,300 | 0.032 | 4,198 | 0.12 | 20.8 | 0.9 | 61.8 | 0.46 | 100 |
Unit Conversion: 1g.cm≈0.098mN.m≈0.014oz.in 1mm=0.039in 1g=0.035oz
Aeromodelling DC motorRemote control plane DC motorDimension: dia. 20.4 x 15.4 Thk. x 32.1 L. shaft O.D. 2.0 mmBasic Structure: SECD housing / SECC end cap Application: AeromodellingWeight: Approx. 33g
Basic Structure of Chengfang Motors
2-pole statorSr ferrite permanent magnet3, 5, 7, 8, 9, 12, 16 slots armatureSilicon-steel lamination with epoxy coatingHigh-carbon steel shaftCu-Ag alloy commutatorCopper-graphite brushesBe-Cu leaf-brush commutating systemSECD round / flat type housingSECD end cap / glassfiber reinforced PA6/6 end capCylinder / self-aligning Cu-Fe alloy sintered bushes155oC (class F) magnet wire ↓ ↓ ↓ ↓ ↓ | Customerized Options
Leadwires with connector / pinsEMI suppression componentsPTC or thermostate protectionBuilt-in AC/DC rectifierBuilt-in cooling fanMultiple output shaft diamond knurls, straight knurls, D-cut, stepped shaftShaft-mounted gears, essentric gears, belt pulleysStainless steel (SS304, SS420) shaftBall bearingCage-brush commutating systemPrecious metal brush / commutatorHall encoderLow-cogging torque design180oC (class H), 200oC (class C) magnet wire-40oC ~ 220oC bearing lubricantNeodymium magnets |