DQ Tractor
Minimum Order: 0
Quality/Safety Certification: 0.00
Self-separate hydraulic elevator ensures reliable use;
540/720r/min dual-power output and wide supporting components hel
| MAIN SPECIFICATIONS OF DQ550,554 | ||||||
| Tractor Parameters | Model | DQ550 | DQ554 | |||
| Drive type | 2WD | 4WD | ||||
| Overall dimension LXWXH(mm) | 3579x1750x2130 | 3579x1750x2130 | ||||
| Wheel Track (mm) | Front | 1200-1500 (usual 1300) | 1250 | |||
| Rear | 1200-1500(usual 1300) | |||||
| Wheel base(mm) | 1996 | 2040 | ||||
| Min. distance from ground(mm) | 400 | 325 | ||||
| Rated Traction Force(N) | 9 | 12 | ||||
| Construction Mass(Kg) | 1665 | 1890 | ||||
| Turning Round Radius(m) | with single break | 3.1 | 3.4 | |||
| without single break | 3.5 | 4.1 | ||||
| Theoretical Speed(km/h) | Number | Low | High | Back | ||
| General gear (8+4) | 1 | 2.65 | 11.4 | 3.94 | ||
| 2 | 3.85 | 16.53 | 5.71 | |||
| 3 | 5.25 | 22.57 | 7.79 | |||
| 4 | 8.1 | 34.78 | 12.1 | |||
| Engine Specifications | Rated Power(km)/Rotation(r/min) | 40.4 | ||||
| Diesel Consumption(g/km/h) | See the details in the Engine Operation Manual | |||||
| Machine Oil Consumption | See the details in the Engine Operation Manual | |||||
| Cylinder no. | 4 | |||||
| Drive System | Clutch | Dual-stage | ||||
| Gear Box | 2 shaft 4x(2+1) gear unitized, or 4x3x3 or 4x2x2 meshing sleeve shifting | |||||
| Differential gear | Two planet wheel, close | |||||
| Differential Lock | Dowel pin | |||||
| Final drive | Planet gear type | |||||
| Front drive axle | Full closure bevel gear type(four-wheel drive model use) | |||||
| Transfer case | Straight toothed spur gear(four-wheel drive model use) | |||||
| Travelling Mechanism | Tyre | Front | 8.3-20 | |||
| Rear | 12.4-28 | |||||
| Steering Gear | Hydraulic steering | |||||
| Brake model | Double plate oil bath pan type brake | Three plate oil bath pan type brake | Double plate oil bath pan type brake | Three plate oil bath pan type brake | ||
| Working Device | Hydraulic System | Max.lifting of 610mm behind lower suspension point(KN) | 11 | |||
| Suspension model | Rear, three-points suspension | |||||
| P.T.O Shaft | Rotating Speed(rpm) | 760/1000 or 540/1000 | ||||
| PTO shaft type | Semi-independence | |||||
| Spline size | φ35x6 tooth or φ38x8 tooth | |||||
