DQ Tractor
Minimum Order: 0
Quality/Safety Certification: 0.00
Self-separate hydraulic elevator ensures reliable use;
540/720r/min dual-power output and wide supporting components hel
| MAIN SPECIFICATIONS OF DQ284 | |||
| Tractor Parameters | Model | DQ284 | |
| Drive type | 4 WD | ||
| Overall dimension LXWXH(mm) | 3225×1440×2787 | ||
| Wheel Track(mm) | Front | 1050 | |
| Rear | 960∼1460 | ||
| Wheel base(mm) | 1639 | ||
| Ground Clearance(mm) | Under Rear Axle | 270 | |
| Rated Traction Force(N) | 6.8KN | ||
| Construction Mass(Kg) | 1190 | ||
| Min.Turning Radius(m) | 52.8±0.2 | ||
| Theoretical Speed | Forward(km/h) | 2.60 5.63 12.03 26.02 | |
| Reverse(km/h) | 2.42 5.24 11.21 24.24 | ||
| Engine Specifications | Model | 3T30 | |
| Type | 3 cylinder,upright inline ,4-strok cycle, water cooled engine | ||
| 12-hour Rated Power(km/hp) | 20.6 | ||
| Rated Fuel Consumption(g/km/h) | ≤238 | ||
| Rated Speed(rpm) | 2350 | ||
| Bore X Stroke(mm) | 85×95 | ||
| Total Displacement(L) | 1.617 | ||
| Drive System | Clutch | dry single stage clutch | |
| Gear Box | (4+1)×2 | ||
| Main Drive | spiral bevel gears | ||
| Differential | Obturation,two bevel gears | ||
| Travelling Mechanism | Tyre | Front | 6.0-14 |
| Rear | 9.5-24 | ||
| Steering Gear | Hydraulic steering | ||
| Working Device | Hydraulic System | Lifting Capacity at 610mm Behind Lift Point(kg) | 460 |
| 3-Point Suspension | Category: | ||
| P.T.O Shaft | Rotating Speed(rpm) | 540/720 or 540/1000optional | |
| Spline Size | 6-35 Rectangular spline | ||
