Cut edge flat transmission belt
Minimum Order: 0
Quality/Safety Certification: 0.00
28OZ, 32OZ
Color, Yellow, Red, Bright yellow, brick
Edge, Moulded ,cut
Width,1"~according to customer's requirement
Category:28OZ,32OZ
Physical and mechanical charateristics
1.The overall thickness tensile strength of common flat belt(in table)
2.Elongation at break (in verticar tensile test,the elon-gation at break should not exceed 20%)
3.Adhesion (adhesion between flat belt layers should be no less than3.0N/MM)
4.Width:20~600mm
Product classification cut edge flat rubber belt
Cut edge rubber belt is manufacturerd by adhering several layers of full width canvas togethere, the sides of the belt are flat surface fomed by cutting, the belt edge suerface are coated with rubber paste.