80W Magnetic Induction Lamp for Highway Lighting
1.CRI>80Ra
2.Lumen:80lm/w
3.Lifespan>100,000hrs
4.No Glare, No Flicker
80W Magnetic Induction Lamp for Highway Lighting
Product Model: RY302C
Technical Information:
² Operating Voltage:220-240V 50Hz
² Lamp:80W Induction Lamp Rectangular Tube RY-JX-80W
² Colour of Housing:According To Customer’s Requirements
² High Pressure Aluminium Die-cast Body coated with epoxy Powed
² The reflector is made of imported Italian materials
² Thermal resistant tempered glass
² IP Rating:IP65
The working principle of electrodeless induction lamp:
² It will transfer the supplied energy into the lamp by coupling the induction from an AC electric-magnetic field, and then create an electron avalanche of the inner filling gas to make it into plasma status
² When the excited atoms under plasma stuaus return to the ground state, it will emit UV radiation at 253.7nm
² The phosphor on the inner side of the bulb wall will get excited by this UV radiation at 253.7nm, and then create visible light
The advantage of electrodeless induction lamp:
² Energy saving more than 75%
² Ultra-long life no replacement needed, save material and labor
² Environment friendly, using solid amalgam non-mercury pollution, meets the requirement of environmental protection
² Good color rendering, close to sunlight and protect the eyes
² No flash, no glare, protect the eyes not to be tired
² High power factor, few energy loss, energy-saving
² The life will not be affected even if switch on/off frequently, the light output will not decline as the fluorescent lamp during life time
² Good electrical specifications, use the IC chip design, high power factor, low current harmonics, steady voltage supplying, steady output of luminous flux
² Optional color temperature and natural color
² Can be made to colorful versions for wider application
² Instant start without preheating, Prevent from the illumination interrupt by the reason of power cut, it can quickly start, be suitable for the emergency lighting without preheating
² The electromagnetic interference (EMC) conforms to the IEC standard
The features of induction light:
² low frequency flood induction light, replace tradional lamps, more affordable
² die-casting aluminium body, surface finished with electrostatic spraying technology
² aluminum reflector, better reflection effect
² tempered glass or PC cover, excellent light transmittance
² high temperature resistance good quality silicon rubber sealing ring for IP65 grade
² low frequency rectangle type induction lighting source, the flood lamp will possess a performance of high efficacy, long lifetime, fine color rendering, smooth look and uniform luminous flux output
² aluminum alloy cover induction lamp ballast with a performance of high power factor, no flicker, low dissipation and constant power etc
Applied Lamp Tube: Rectangular Lamp Tube RX-JX-80W
Applications:
high pole lamp, billboards, buildings, parks, plazas, tennis courts, railway stations, airports, stadium, pools, floodlights, urban greening, sculpture, etc
*Note: Color Temperature 2300/2700/3500/4000/5000/6500K & other voltages are available
Cases:
Jessica Han
