LED transformer - single output, China LED transformer

LED transformer - single output

Quanzhou Smarts Electronic & Technology Co., Ltd. [China]

Minimum Order: 0

Quality/Safety Certification: 0.00

Professional LED power supply/LED driver manufacturer.
Most of products are CE, UL, ROHS approved.
Universal inputage 100-280v

Description:

Competitived price and high reliability 105°C Output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effect With short-circuit and overload protection Compact size, light weight 100% full-load burn-in test Installed with EMI filter, minimum wave

Model Performance	SMT-35-5	SMT-35-12	SMT-35-15	SMT-35-24
DC output voltage	5V	12V	15V	24V
Output Voltage Tolerance (Note 2)	± 2%	± 1%	± 1%	± 1%
Rated output current	7A	3A	2.4A	1.5A
Output Current Range	0 -7A	0 -3A	0 -2.4A	0 -1.5A
Ripple and noise (Note 3)	75mVp-p	100mVp-p	100mVp-p	100mVp-p
Into the line of stability (Note 4)	±0.5%	±0.5%	±0.5%	±0.5%
Load stability (Note 5)	±1%	±0.5%	±0.5%	±0.5%
DC output power	35W	36W	36W	36W
Efficiency	70%	76%	78%	78%
DC voltage adjustable range	±10,-5%	±10%	±10%	±10%
Input Voltage Range	85 ~ 132VAC/170 ~ 280VAC by switch 47-63Hz
Input Current	0.8A /115V ,0.4A /230V
Inrush Current	Current 18A/115V 36A/230V cold start
Leakage	<0.5mA/240VAC
Overload Type	105% ~ 150% Type: FOLDBACK cut output reset: Automatic restore
Over Voltage Protection	…… ... ...
Temperature Protection	…… ... ...
Temperature Coefficient	± 0.03%/ °C (0 ~ 50°C )
Start, rise, hold time	200ms,100ms,30ms
Earthquake resistance	10 ~ 500Hz,2G 10min. / 1 cycle, duration 60 minutes, each axis
Pressure of	Between input and output: 1.5KvAC, input and shell: 1.5KvAC, output and shell: 0.5KvAC
Isolation Resistance	Input and output, input and shell, shell and output: 500VDC/100M Ohms
Temperature, humidity	-10°C ~ + 60°C , 20% ~ 90% RH
Storage temperature, temperature	-20°C ~ + 85°C ,10% ~ 95% RH
Dimensions	1299838mm
Weight	0.4Kgs
Safety Standards	To meet UL1012 requirements
EMC Standards	To meet the FCC PART15JCONDUCTION CLASS B
Notes: 1 The above parameters test conditions are: 230VAC input, rated load, 25 °C 70% RH. Humidity. 2 Tolerance: includes set up tolerance, line stability, load stability (Note 5). 3 The ripple test: 20MHz with A12 "twisted pair, interrupted with 0.1uF & 47uF capacitor short-circuit. 4 Into the line voltage stability test: full load into the line of the minimum voltage to maximum voltage. 5 Load stability test: the load from 0% to 100%.